AB7000-C
AB7000-C
AB7000-C
AB7000-C
AB7000-C
AB7000-C
Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com
How We Verify Your Order
Before dispatch, we confirm the exact model, revision, condition, inspection requirements and shipping documents for your order.
See a real on-site verification case >>

AB7000-C

/ 4.9
1001 reviews | Need a Specific Revision?
HMS Networks Anybus AB7000-C converts RS-232, RS-422 or RS-485 serial traffic into PROFIBUS-DP/DPV1 slave data for industrial control systems.
In Stock
Ships by Saturday, November 14
Fast Shipping Available
Get a quick price for AB7000-C
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for AB7000-C

  • Manufacturer:
    HMS
  • Part Number:
    AB7000-C
  • Product Family:
    HMS
  • Product Type:
    Serial Master to PROFIBUS Protocol Converter
  • Stock:
    1
  • Serial Role:
    Client / Master
  • Serial Interface:
    RS-232, RS-422 and RS-485
  • Serial Nodes:
    31 maximum
  • Serial Baud Rate:
    1,200 to 57,600 bit/s
  • Modbus RTU Data:
    512-byte input and 512-byte output areas
  • PROFIBUS Role:
    DP/DPV1 slave
  • PROFIBUS Address:
    0–125
  • PROFIBUS Baud Rate:
    9.6 kbit/s to 12 Mbit/s
  • PROFIBUS I/O:
    244 bytes input, 244 bytes output; 344 bytes maximum total
  • Input Voltage:
    24 VDC, -10% to +10%
  • Current Consumption:
    100 mA nominal; 300 mA maximum at 24 VDC
  • Mounting:
    DIN rail, EN 50022
  • Operating Temperature:
    0 to 55°C
  • Storage Temperature:
    -40 to +85°C
  • Protection:
    IP20
  • Dimensions:
    2.7 × 12 × 7.5 cm
  • Weight:
    0.15 kg
  • Tariff Code:
    8517620000
  • Country of origin:
    Sweden
  • Place of shipment:
    Xiamen, Fujian, China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Serial Network PROFIBUS Interface Migration Check Application
  • Serial client/master support for RS-232, RS-422 and RS-485 devices
  • PROFIBUS-DP and DP-V1 slave interface with GSD-based controller configuration
  • Legacy AB7000-C gateway with HMS-listed successor ABC3000-A

AB7000-C is an HMS Networks Anybus Communicator that maps serial device data into a PROFIBUS-DP or DP-V1 slave for the controller.

It supports up to 31 serial nodes, PROFIBUS addresses 0 to 125, and configurable Modbus RTU, DF1, request/response, and produce/consume transactions.

Replacement or migration work must preserve serial framing, transaction definitions, byte order, PROFIBUS address, GSD configuration, I/O mapping, watchdog behavior, and PLC diagnostics.

Availability, condition, price, and shipping time for AB7000-C are confirmed during quotation.

HMS Anybus AB7000-C Serial Master to PROFIBUS Protocol Converter Manuals, Datasheets, Links

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

  • RS-232, RS-422 and RS-485 are supported
  • Up to 31 serial nodes can be addressed
  • Modbus RTU, DF1 and configurable transactions are available
  • The gateway operates as a PROFIBUS-DP/DPV1 slave
  • Device addresses from 0 through 125 are supported
  • A GSD file defines the PLC-side configuration
  • ABC3000-A is the listed successor
  • Preserve serial commands and mapped process data
  • Retest PLC diagnostics, watchdogs and byte order after migration
  • Connecting a Modbus RTU instrument network to a PROFIBUS PLC
  • Integrating an RS-232 device into a PROFIBUS-DP control system
  • Converting custom RS-485 request/response data into mapped PROFIBUS I/O
Description
HMS Networks AB7000-C is an Anybus Communicator that connects RS-232, RS-422 or RS-485 serial devices and networks to a PROFIBUS-DP or DP-V1 control system.

The gateway operates as a client or master on the serial side and as a PROFIBUS slave on the fieldbus side. It supports up to 31 serial nodes, PROFIBUS addresses 0 to 125, and configurable Modbus RTU, DF1, request/response, and produce/consume transactions.

Before installation, replacement or migration to the HMS-listed ABC3000-A successor, verify the 24 V DC supply, serial interface and framing, transaction definitions, byte order, PROFIBUS address, GSD configuration, I/O mapping, watchdog behavior, and PLC diagnostics.
Alternative Names
Anybus AB7000-C HMS AB7000-C HMS Networks AB7000-C AB7000 C AB 7000-C Anybus Communicator AB7000-C
Technical notes
HMS Anybus AB7000-C migration must preserve the GSD, PROFIBUS address, serial framing, transaction list, I/O map, byte order, watchdog behavior, 24 VDC budget, and PLC diagnostic handling.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
Can Anybus AB7000-C be a serial master and a PROFIBUS slave at the same time?
Yes. The serial side operates as client/master while the PROFIBUS side is a DP/DPV1 slave presented to the PLC or control system.
What must be configured in the PROFIBUS master for Anybus AB7000-C?
Install the matching GSD file, set the 0–125 device address, define the I/O module map and verify DP-V1, diagnostics, watchdog and byte-order expectations.
Can Anybus AB7000-C be installed in a Class I Division 2 panel?
The manufacturer data lists the applicable UL hazardous-location approval; the final enclosure, wiring method and local approval must meet the project requirements.
Can ABC3000-A replace Anybus AB7000-C without PLC changes?
Not automatically. HMS lists ABC3000-A as successor, but the serial transactions, PROFIBUS GSD, I/O map, address and PLC diagnostics must be reviewed and tested.
What should be backed up before replacing an installed Anybus AB7000-C?
Save the complete gateway configuration, including serial framing, node settings, transaction definitions, I/O mapping, byte order, PROFIBUS address and the matching GSD configuration used by the controller.
Can Anybus AB7000-C communicate with a serial device that has no ready-made driver?
Potentially, if the device protocol can be represented with the configurable request/response or produce/consume transactions. Obtain the device protocol manual and verify message framing, addressing, checksums, timing and response handling before purchase.
How can a replacement Anybus AB7000-C be commissioned without changing PLC data unexpectedly?
Load and review the saved configuration before connection, preserve the PROFIBUS address and I/O map, perform the exchange during a planned stop, and then verify Data Exchange status, diagnostics and every serial transaction before returning the process to service.