Features:
- A universal 100–240 V AC input feeds a regulated 24 V DC, 1.3 A output.
- DC ON and DC LOW indicators expose output and undervoltage conditions.
- The 22.5 mm enclosure supports DIN-rail or direct-panel mounting.
Omron S8VS-03024/ED2 supplies control loads from a narrow natural-convection housing.
Separate input, earth, and output terminals keep mains and load wiring organized.
Input voltage, load current, ventilation, and V.ADJ position should be checked before replacing the supply.
Omron S8VS-03024/ED2 30 W Power Supply Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Mains Input Path
- Nominal: The supply accepts 100 to 240 V AC.
- Permissible: The documented range extends from 85 to 264 V AC.
- Frequency: The input accepts 50/60 Hz mains.
- Earth: Protective earth terminates beside the input conductors.
24 V DC Load Supply
- Rating: The output provides 24 V DC at 1.3 A.
- Power: The rated load is 30 W.
- Adjustment: The front V.ADJ control trims the output voltage.
- Indicators: DC ON and DC LOW show output conditions.
Load and Voltage Protection
- Overload: The supply limits output during excessive load demand.
- Overvoltage: The protection circuit prevents sustained excessive output voltage.
- Recovery: Remove the fault condition before evaluating normal output.
- Check: Measure the load current before changing the adjustment.
Cooling and Installation
- Width: The enclosure is 22.5 mm wide.
- DIN rail: The rear clip secures the supply to a DIN rail.
- Panel: Direct panel mounting is supported.
- Temperature: Natural-convection operation is specified from -10 to +60 °C.