Product overview:
- One HART enabler license per I/O module
- Applies to onboard and expansion I/O
- Local RTU and remote HART-IP device access
Honeywell SP-IHARTP enables HART digital access for one ControlEdge RTU I/O module. A separate license is required for every onboard or expansion I/O module on which HART data and diagnostics will be used.
The enabled HART information can be consumed locally by the RTU program and accessed remotely through HART-IP with Honeywell Field Device Manager. ControlEdge Builder also provides HART function blocks for dynamic variables, additional device status and broader command handling.
Determine the licensed quantity from the actual number of HART-enabled I/O modules, not the number of connected transmitters alone. Verify module capability, channel wiring, device descriptors, controller firmware and HART-IP routing before commissioning asset-management access.
Verified resources for SP-IHARTP:
License Data:
- Allocation: per HART-enabled I/O module
- Access: local program and HART-IP
- Engineering: ControlEdge Builder HART blocks
Use the documented SP-IHARTP entitlement or release data when planning the engineering environment.
Compatibility:
- Confirm HART capability of each I/O module
- Match controller and Builder firmware
- Verify Field Device Manager and network routing
Compatibility for SP-IHARTP depends on the exact software release, controller firmware and validated project revision.
Deployment:
- Count onboard and expansion HART modules
- Enable the licensed protocol function
- Map device variables and diagnostics
Deploy SP-IHARTP under controlled engineering access and retain the installation and entitlement records.
Installation Check:
- Verify license allocation by module
- Read live HART variables and status
- Test remote HART-IP access
Complete release, project and communication checks before SP-IHARTP is used on a production system.