Features:
- Identifies Honeywell part 51401286-100 as the EPDG board assembly.
- Belongs to the documented Dual Node Module service-parts structure.
- Requires the full board number to be matched during maintenance planning.
Part number 51401286-100 identifies the Enhanced Peripheral Display Generator board assembly.
The board processes the legacy operator-station peripheral display path in the supported node hardware.
Confirm node type, EPDG I/O companion, firmware and peripheral revision requirements before replacement.
Supply is checked against node configuration, firmware and peripheral-support requirements.
Verified resources for Honeywell 51401286-100:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Restore display-generation functions in supported Honeywell Dual Node hardware.
- Maintain the operator-station peripheral path in a legacy TDC 3000 environment.
- Support revision-qualified pointing and display peripherals documented for the node.
- The EPDG works with the corresponding EPDG I/O hardware in the node.
- Trackball, mouse, and storage support depend on documented hardware and firmware revisions.
- The connected display arrangement must match the installed service configuration.
- Peripheral capabilities are tied to the minimum EPDG board and firmware levels.
- A board swap must retain the validated node software baseline.
- Revision records are required before enabling a different pointing device or drive.
- Electrostatic-discharge controls are required when handling the board assembly.
- Board seating and companion-cable position must be recorded before removal.
- The replacement must use the complete 51401286-100 part identity.