Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail info@apterpower.com

FBM216B

/ 4.9
1001 reviews | Need a Specific Revision?
Foxboro FBM216B is a redundant eight-channel isolated analog input module supporting mixed standard 4-20 mA and HART transmitters in Foxboro DCS systems.
In Stock
Ships by Saturday, October 17
Fast Shipping Available
Get a quick price for FBM216B
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for FBM216B

  • Manufacturer:
    Invensys
  • Part Number:
    FBM216B
  • Product Family:
    Foxboro
  • Product Type:
    Redundant Eight-Channel Isolated HART Analog Input Module
  • Stock:
    1
  • Analog input channels:
    8, independent and isolated
  • Channel mix:
    Any mix of standard 4-20 mA and HART devices
  • Transmitter compliance:
    18.5 VDC minimum at 20.5 mA
  • Sense resistor:
    280 Ω ±0.02%
  • Input impedance:
    282 Ω with external power; 302 Ω with internal power
  • Analog accuracy:
    ±0.075% of full scale
  • Temperature coefficient:
    50 ppm/°C
  • Input resolution:
    15 bits
  • Update / integration:
    100 ms update; 500 ms integration
  • Common-mode rejection:
    >100 dB
  • Normal-mode rejection:
    >35 dB
  • Current limit:
    Below 37 mA single; below 72 mA redundant
  • System software:
    I/A Series v8.2-v8.8 or Control Core Services v9 or later
  • Power consumption:
    7 W maximum
  • Heat dissipation:
    4 W maximum
  • Input power:
    24 VDC +5%, -10%
  • Operating temperature:
    -20 to +70°C
  • Storage temperature:
    -40 to +70°C
  • Relative humidity:
    5 to 95%, noncondensing
  • Contamination class:
    ISA-S71.04 Class G3
  • Dimensions:
    4.5 × 10.2 × 14.0 cm
  • Redundancy:
    Master/tracker module pair
  • HART protocol:
    Versions 5, 6 and 7
  • HART communications:
    Point-to-point master/slave, asynchronous half-duplex, 1200 baud
  • HART message rate:
    2 messages per second; burst mode not supported
  • Maximum HART distance:
    Up to 3,030 m subject to HART physical-layer and loop limits
  • Required redundant adapter:
    RH924DT
  • Operating altitude:
    -300 to +3,000 m
  • Storage altitude:
    -300 to +12,000 m
  • Vibration:
    0.75 g from 5 to 500 Hz
  • Weight:
    0.284 kg
  • Tariff Code:
    8538900000
  • Country of origin:
    USA
  • Place of shipment:
    Xiamen, Fujian, China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Redundant Architecture Loop & HART Design Failover Commissioning Application
  • Confirm the installed FBM216B redundant-pair, HART and channel configuration before replacement
  • Confirm the exact module identity, termination hardware and cable before replacement
  • Preserve field wiring, channel configuration, diagnostics and control state before removal

Foxboro FBM216B is a redundant eight-channel isolated analog input module supporting mixed standard 4-20 mA and HART transmitters in Foxboro DCS systems.

The official document styles the function as FBM216b; RH927AJ is the current module part number, P0927AJ is superseded, and RH924DT is the separate redundant adapter.

Before replacement, verify the exact label, termination hardware, cable, signal limits, field wiring, saved configuration and supported system environment.

Availability, condition, price, and shipping time for FBM216B are confirmed during quotation.

Foxboro FBM216B Manuals, Datasheets, Links

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

  • Install the master/tracker pair with the documented RH924DT adapter
  • Confirm the supported I/A Series or Control Core software baseline
  • Preserve module roles, slot allocation and termination identities
  • Check 18.5 VDC minimum compliance at 20.5 mA for every transmitter
  • Account for the documented input resistance and total cable burden
  • Use point-to-point HART service and do not enable burst mode
  • Inject traceable current on every used input channel
  • Confirm HART device identity, variables and diagnostics
  • Test approved master/tracker transfer while monitoring signal quality and alarms
  • Redundant HART transmitter input acquisition
  • Standard 4-20 mA analog transmitter acquisition
  • HART device data and diagnostics through Field Device Expert
Description
Foxboro FBM216B is a redundant eight-channel isolated analog input module supporting mixed standard 4-20 mA and HART transmitters in Foxboro DCS systems.

Its documented channel architecture, signal limits and diagnostics support model-specific Foxboro DCS field I/O service without changing the official identity of FBM216B.

Before installation, verify the complete nameplate, order-number relationship, termination hardware, cable, field power, saved configuration, grounding and system compatibility.
Alternative Names
FBM216B FBM 216B Foxboro FBM216B Invensys FBM216B Invensys Foxboro FBM216B I/A Series FBM216B FBM216b Foxboro FBM216b
Technical notes
The official document styles the function as FBM216b; RH927AJ is the current module part number, P0927AJ is superseded, and RH924DT is the separate redundant adapter. Use RH924DT and verify the project-specified termination assembly, cable, power method and software compatibility.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
What redundancy arrangement does FBM216B use?
It operates as a master/tracker module pair with the documented RH924DT redundant adapter and compatible system software.
Can FBM216B mix standard and HART transmitters?
Yes. Its eight isolated input channels may use any mix of standard 4-20 mA and supported HART devices.
Which software baseline is required for FBM216B?
The official specification requires I/A Series v8.2 through v8.8 or Control Core Services v9 or later; verify the actual system release.
Does FBM216B support HART burst mode?
No. It supports HART versions 5, 6 and 7 in point-to-point master/slave operation at 1200 baud, up to two messages per second.
What compliance voltage does FBM216B provide?
The official minimum transmitter compliance is 18.5 VDC at 20.5 mA; verify total loop burden, field wiring and transmitter requirements.
What should be retained before replacing FBM216B?
Retain both labels, master/tracker state, adapter, termination and cable identities, power method, scaling, HART device records, alarms and diagnostics.
How should FBM216B be commissioned?
Inject traceable loop currents, confirm every HART device and variable, validate master/tracker synchronization and approved failover, then verify alarms and diagnostics.

Product Browsing History