Features:
- Console interface: Embedded GCIO module for supported Foxboro I/A Series H92 workstation hardware.
- No-touchscreen version: The nameplate identifies the supplied unit as GCIO MIW W/O TS WP50.
- Keyboard capacity: One module connects as many as two supported GCIO keyboards.
P0904BS provides the graphics-controller input/output link between the configured workstation port and operator keyboards.
Its embedded MIC, MIW or Command Center format differs from the separately documented table-top GCIO arrangement.
When three or four supported GCIO keyboards are required, the H92 architecture adds a second module and the specified interconnect cabling.
Apter Power provides documentation, quotation and procurement support for the Invensys P0904BS P0904BS-0E I/A Series Embedded GCIO Interface Module without Touchscreen.
Invensys P0904BS P0904BS-0E I/A Series Embedded GCIO Interface Module without Touchscreen Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Supported host: Listed by Foxboro for the Model H92 workstation.
- System Definition: The GCIO connects to the workstation serial port assigned in the system configuration.
- Embedded console: Used within MIC, MIW or Command Center assemblies.
- Replacement check: Match workstation generation, console mounting and the configured GCIO port.
- Keyboard capacity: One module services up to two supported GCIO keyboards.
- Expanded capacity: Three or four keyboards require a second GCIO module.
- Workstation cables: P0971SU, P0971SV and P0971WZ cover 3 m, 15 m and 30 m runs.
- Dual-GCIO arrangement: Foxboro also shows P0970HV and P0800MW interconnect cables.
- Base model: P0904BS defines the embedded no-touchscreen GCIO function.
- Revision: REV 0E identifies the observed hardware revision.
- Search form: P0904BS-0E is retained for revision-aware sourcing, not treated as a different function.
- RFQ practice: Quote the base model, revision and full nameplate wording together.
- Operator interface: Connects supported annunciator-keyboard peripherals to an H92 workstation.
- No touchscreen: Use a different supported GCIO variant when touchscreen control is required.
- Not field I/O: It is not a PLC output card or process I/O module.
- Service boundary: Match console mounting, port definition, keyboard type and cabling before release.