- Confirm P0926GW is the single-Ethernet FBM232 rather than an analog I/O module
- Verify that the required device driver supports the target Ethernet device and data map
- Size the design by device count, DCI count, scan performance and network architecture
Foxboro P0926GW is the exact part number for the FBM232 single-port Field Device System Integrator module.
It links supported 10/100 Mbps Ethernet devices to a Foxboro control station through the redundant 2 Mbps Module Fieldbus.
Before selection, identify the downloadable driver, device count, DCI mapping, polling requirements, IP scheme, switch topology and controller compatibility.
Availability, condition, price, and shipping time for P0926GW are confirmed during quotation.
Foxboro P0926GW Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- A downloadable driver handles the supported device protocol
- Up to 64 devices can be addressed when the application permits
- Device data is mapped into DCI blocks for control-system use
- The field port supports 10 or 100 Mbps copper Ethernet
- Multiple devices require an appropriate hub or switch
- IP addressing, polling and switch behavior must match the driver design
- Preserve the XML port and device configuration
- Archive the driver package and DCI map
- Validate update timing and reconnect behavior after commissioning
- Ethernet field-device integration into Foxboro DCS
- Protocol conversion using a supported FBM232 driver
- Data exchange between packaged equipment and DCI control blocks