- Supports the documented five-megapixel camera class
- Built-in battery in the F configuration
- Wider CV-X controller body for this model class
CV-X470F is the five-megapixel camera-supporting F controller in the KEYENCE CV-X Series.
It provides the controller platform for configured image acquisition, processing, judgement, and data exchange in higher-resolution industrial inspection work.
A controlled replacement preserves the exact cameras, optics, lighting, project, I/O, communications, storage media, and installation clearance.
Availability, condition, price, and shipping time for CV-X470F are confirmed during quotation.
KEYENCE CV-X470F Vision System Controller Manuals, Product Family, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The exact model is identified as a five-megapixel camera-supporting controller.
- Camera head, transfer capacity, cable, and lighting compatibility require confirmation.
- Optics and exposure settings remain tied to the qualified inspection project.
- Install the camera input unit directly beside the CV-X470F controller before adding illumination expansion units.
- Do not install an illumination expansion unit between the controller and the camera input unit.
- Switch off the controller and illumination power before attaching or removing expansion units, and keep unused expansion connectors covered.
- Archive the validated project and all camera calibration data.
- Record the I/O map, communication settings, and connected hardware.
- Use approved samples to repeat the production acceptance test.
- Higher-resolution surface and defect inspection.
- Presence, orientation, and assembly verification.
- Dimensional measurement using a validated vision setup.