- ESC4 V5.0 safety-interface assembly
- Fused and relay-switched controller circuits
- Carrier-mounted serviceable connector layout
KUKA ESC-PLATINE consolidates protected safety and controller-interface circuits on a carrier-mounted board assembly for an assigned KUKA control cabinet.
The photographed assembly is identified by ESC4 V5.0, board number 5.04.058.265/0100-00 and label S141.00.011.513; these identifiers must be matched together when selecting a replacement.
Availability, condition, price, and shipping time for KUKA ESC-PLATINE are confirmed during quotation.
KUKA ESC-PLATINE ESC4 V5.0 Product Family and Support Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Confirm the ESC4 V5.0 board designation
- Match board number 5.04.058.265/0100-00
- Match label S141.00.011.513 and the documented A1 installation position
- Preserve every safety and controller connector assignment
- Use the documented fuse ratings for each protected circuit
- Maintain the specified relay type, rating and installed position
- Isolate and verify controller power before removing the assembly
- Record connector, wiring, fuse and relay positions before replacement
- Complete the approved safety-function and controller-interlock tests before returning the system to service
- KUKA robot-controller safety-circuit interfacing
- Protected relay switching for controller and connected field circuits
- Maintenance replacement in a matching KUKA control cabinet