Fast Quote
MFC2 Q100 5.04.058.997/0100-00 T093.00.000.122 is an interface card used to extend a compatible KUKA robot-controller PC with the hardware connections required by the installed control system.
The board combines a PCI edge connection with external D-sub and modular interfaces. Compatibility depends on the controller generation, computer platform, slot configuration, drivers and complete board identification.
Before replacement, record the controller image, installed drivers, PCI slot, cable locations and all three identifiers. This model must not be combined with MFC2-IC3, 00-125-236 or 00-108-766 unless KUKA documentation confirms equivalence.
KUKA MFC2 Q100 5.04.058.997/0100-00 T093.00.000.122 Product Family and Support Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Treat the board designation and both numeric identifiers as one complete replacement identity.
Do not merge this product record with MFC2-IC3, 00-125-236 or 00-108-766 solely because the boards belong to the broader MFC2 family.
The MFC2 Q100 board must be installed in the controller-PC slot assigned by the original KUKA hardware configuration.
PCI resources, driver versions and connected interfaces must be verified together before the controller is returned to automatic operation.
Photograph the installed board, connector locations and PCI position before disconnecting the original MFC2 Q100.
After replacement, confirm normal controller startup, absence of interface faults and correct operation of every service or communication path connected through the card.
MFC2 Q100 5.04.058.997/0100-00 T093.00.000.122 is used where a compatible KUKA controller PC requires the board's assigned external interfaces.
The card is intended for configuration-controlled replacement in the matching controller platform rather than use as a universal PCI communication card.





