Features:
- 32 MHz MC68040 processor
- 4MB parity-protected DRAM
- Four EIA-232-D serial ports
Motorola identifies MVME162-723 as a 700/800-Series MVME162LX VME Embedded Controller with 4MB DRAM. The official assembly designation confirms the 32 MHz processor and 4MB non-ECC DRAM configuration.
The controller combines 32 MHz processing with serial I/O, IndustryPack expansion, battery-backed SRAM, and VMEbus functions. Four RJ-45 serial connections, optional SCSI and Ethernet interfaces, and two IndustryPack positions support flexible front-panel I/O integration.
Verify the exact optional interfaces, power, P1/P2 connections, and forced-air cooling before installation. The exact installed network and storage options must be verified from the board assembly before selecting cables or planning a replacement.
The Motorola VME MVME162-723 700/800-Series MVME162LX VME Embedded Controller is listed as Active / Available from OEM. Contact Apter Power for quotation, official documentation, and configuration review.
Motorola VME MVME162-723 700/800-Series MVME162LX VME Embedded Controller Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola VME MVME162-723 700/800-Series MVME162LX VME Embedded Controller Specs
General
- ManufacturerMotorola VME
- ModelMVME162-723
- ConditionNew Original ready stock
- Product FamilyMVME162LX 700/800 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Board memory resources
- Main memory: 4MB DRAM with parity protection
- Backup memory: 128KB SRAM with battery backup
- NVRAM / clock: 8K x 8 NVRAM with time-of-day clock
- Firmware storage: Optional Flash memory is configuration-dependent
Serial and IndustryPack I/O
- Serial I/O: Four EIA-232-D serial ports
- IndustryPack: Two IndustryPack interfaces with two-channel DMA
- Platform bus: VMEbus system-controller functions
- Storage: Optional SCSI and Ethernet require assembly verification
Chassis and commissioning checks
- Chassis: Use a compatible double-high VME chassis
- Backplane: Verify P1 and P2 connections
- Cabling: Confirm fitted optional interfaces before cabling
- Cooling: Provide forced-air cooling across the controller