Features:
- Official new part number for the Scanbe-handle MVME5500 build
- 1 GHz MPC7457 with 512MB ECC SDRAM and 40MB flash
- Dual Ethernet, two PMC sites, and Universe II VME64 connectivity
MVME55006E-0161R is the current ordering-table identity for the Scanbe 6E assembly and supersedes the non-R code in the documented part-number pairing.
The board connects cached PowerPC processing and ECC SDRAM to VME64, dual Ethernet, serial interfaces, two PMC sites, and persistent memory facilities.
Use the R suffix during quotation and verify Scanbe handle clearance, transition-module routing, PMC signal requirements, supported software, and airflow before installation.
Apter Power can assist with documentation, configuration matching, and quotation requests for the Motorola MVME55006E-0161R NXP MPC7457 VME Single-Board Computer.
Motorola MVME55006E-0161R NXP MPC7457 VME Single-Board Computer Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME55006E-0161R NXP MPC7457 VME Single-Board Computer Specs
General
- ManufacturerMotorola
- ModelMVME55006E-0161R
- ConditionNew Original ready stock
- Product FamilyMVME5500 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Storage hierarchy
- Main SDRAM: Two soldered banks deliver 512MB of 133 MHz ECC memory.
- Processor cache: The MPC7457 provides 512KB L2 and 2MB external L3 cache resources.
- Flash banks: A 32MB bank and an 8MB bank provide 40MB of on-board programmable flash.
- Nonvolatile data: The board includes 32KB NVRAM, with 4KB documented as user available.
Communication paths
- Gigabit Ethernet: Port 1 routes 10/100/1000Base-T through a front-panel RJ-45 connector.
- Secondary Ethernet: Port 2 supports 10/100Base-T through the front panel or optional transition routing.
- Serial access: Two UART channels provide the documented asynchronous serial connections.
- VME communication: Universe II links the local PCI bus to ANSI/VITA 1-1994 VME64.
Configuration review
- Ordering match: Use the complete MVME55006E-0161R code when confirming the new Scanbe-handle part.
- PMC review: Check card width, 3.3V or 5V keying, power demand, and I/O routing.
- Transition hardware: Select the documented P2 adapter and MVME761 arrangement for required rear I/O.
- Thermal design: Provide forced airflow and observe the inlet-air limits stated by the manufacturer.