Features:
- 64 MHz MC68LC060 processor
- 8MB onboard DRAM
- SCSI, Ethernet, and VMEbus connectivity
Motorola lists MVME172-433 among the MVME172FX 400/500-Series combinations, pairing a 64 MHz MC68LC060 processor with 8MB DRAM, SCSI, and Ethernet.
The board supplies local processing and memory together with storage, network, serial, and VMEbus resources, allowing it to operate as the computing element in a compatible VME enclosure.
When matching this configuration, check the MC68LC060 processor variant and 8MB memory rather than relying on the MVME172 family name alone; backplane, transition-module, firmware, and airflow requirements also need confirmation.
Quotation and official-document support for the Motorola MVME172-433 MVME172FX VME Embedded Controller are available through Apter Power.
Motorola MVME172-433 MVME172FX VME Embedded Controller Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME172-433 MVME172FX VME Embedded Controller Specs
General
- ManufacturerMotorola VME
- ModelMVME172-433
- ConditionNew Original ready stock
- Product FamilyMVME172FX 400/500 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
MC68LC060 and local memory resources
- Processor: Motorola assigns a 64 MHz MC68LC060 for MVME172-433.
- Main memory: Local workspace is supplied by 8MB DRAM.
- Firmware: Motorola's onboard monitor resources support startup, configuration, and board-level service on the MVME172FX.
- Board role: The CPU, DRAM, monitor firmware, and VME control functions operate together on the MVME172FX board.
Peripheral and system-bus interfaces
- SCSI: MVME172-433 provides the documented storage/peripheral interface for supported devices.
- Ethernet: Its onboard Ethernet controller supplies the network path defined for this ordering configuration.
- VMEbus: The address and transfer modes must be aligned with the host chassis and application.
- System connection: Transition hardware and backplane routing determine how the onboard interfaces reach external equipment.
MVME172FX matching requirements
- Board format: The MVME172FX board requires double-high VME clearance and the connector layout shown in its installation drawing.
- P1/P2 interface: Connector use and transition-module wiring must follow the Motorola installation drawing for this exact board.
- Cooling: Direct forced air across the MVME172FX so the documented exit-air temperature is not exceeded.
- Final check: Compare the MC68LC060 processor, 8MB memory, transition module, and full -433 code with the removed board.