Features:
- 25 MHz MC68040 processor with FPU
- 4MB parity-protected DRAM
- Ethernet interface without SCSI
Motorola identifies MVME162-222 as an MVME162LX 200/300 Series configuration with a 25 MHz MC68040, 4MB parity DRAM, Ethernet, two IndustryPack interfaces, and four serial ports.
The board supports VMEbus-based embedded control, front-panel serial communications, network connectivity, and modular I/O expansion with D64 block-transfer capability.
Confirm A16/A24/A32 addressing, D8/D16/D32 transfers, D64 BLT support, front-panel cabling, IndustryPack selection, and forced-air cooling before installation.
The Motorola VME MVME162-222 MVME162LX VME Embedded Controller may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Motorola VME MVME162-222 MVME162LX VME Embedded Controller Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola VME MVME162-222 MVME162LX VME Embedded Controller Specs
General
- ManufacturerMotorola VME
- ModelMVME162-222
- ConditionNew Original ready stock
- Product FamilyMVME162LX 200/300 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Onboard memory resources
- DRAM: 4MB parity-protected DRAM.
- SRAM: Battery-backed static RAM.
- Firmware storage: Flash memory for monitor/debugger firmware.
- NVRAM: Battery-backed NVRAM and time-of-day clock.
Network, serial, and VME connections
- Network: Ethernet interface.
- Storage: No SCSI interface.
- VMEbus: A16/A24/A32 addressing; D8/D16/D32 with D64 BLT.
- Expansion I/O: Four serial ports and two IndustryPack interfaces.
Chassis and installation checks
- Compatibility: Verify VME chassis and backplane compatibility before insertion.
- Configuration: Confirm jumper and system-controller settings against the Motorola manual.
- Cooling: Maintain an operating range of 0°C to +70°C with forced-air cooling.
- Handling: Use antistatic precautions and remove chassis power before installation.