Features:
- 333 MHz MPC604R computing engine
- 16MB error-correcting DRAM
- IEEE 1101 handle configuration
The MVME2304-0113 order code selects 333 MHz MPC604R processing, 16MB ECC DRAM, and an IEEE 1101 handle rather than the Scanbe alternative.
Ethernet and VMEbus connectivity are supplemented by flash storage, a service/debug connection, and two PMC locations for compatible mezzanine functions.
When replacing this module, preserve the IEEE 1101 faceplate style and validate memory headroom, installed PMC boards, firmware, chassis clearance, and cooling.
For the Motorola MVME2304-0113 VME Processor Module, Apter Power provides quotation support and access to the applicable documentation.
Motorola MVME2304-0113 VME Processor Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME2304-0113 VME Processor Module Specs
General
- ManufacturerMotorola VME
- ModelMVME2304-0113
- ConditionNew Original ready stock
- Product FamilyMVME2300 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
IEEE-handle MPC604R configuration
- Processor: The processor resource is a 333 MHz MPC604R for MVME2304-0113.
- Main memory: Error-correcting storage consists of 16MB ECC DRAM.
- Firmware: The 5MB flash subsystem retains initialization code and board-support software across power cycles.
- Board role: This IEEE-handle assembly keeps the processor, memory, and bus-control resources on one double-high module.
Expansion and service interfaces
- Ethernet: The IEEE-handle MVME2304-0113 carries the same onboard Ethernet function as its Scanbe counterpart.
- PMC sites: Two PMC locations are available on the IEEE-handle 0113 assembly for compatible option cards.
- Debug port: The 0113 assembly includes the family debug port for startup checks and maintenance activity.
- VMEbus: Backplane transfers on the 0113 assembly connect its IEEE-panel processor board to the VME system.
0113 physical-fit checks
- Board format: The 0113 variant should be placed in a slot compatible with its IEEE 1101 panel and backplane connectors.
- Front handle: Motorola specifies a IEEE 1101 handle for MVME2304-0113; keep that mechanical option when matching the enclosure.
- Cooling: Forced-air provision for MVME2304-0113 must account for the processor module and installed mezzanines.
- Final check: Do not substitute the 0111 Scanbe version for 0113 without checking the enclosure front-panel hardware.