Features:
- 32 MHz MC68040 processor
- 16MB SDRAM with battery-backed SRAM
- SCSI and Ethernet configuration
Motorola identifies MVME162P-344SE as an MVME162P4 VME Embedded Controller for compatible embedded computing systems. This configuration is the SCSI-and-Ethernet member of the 32 MHz MVME162P4 ordering group.
The ordering configuration combines a 32 MHz MC68040 processor, 16MB SDRAM, SCSI, and Ethernet. Petra coordinates the memory and local I/O subsystem, while VMEchip2 and DMA resources support bus transfers and IndustryPack expansion.
Verify chassis power, airflow, P1/P2 connections, and transition hardware before installation. Installation planning must include the correct P2 arrangement, transition hardware, serial interface settings, and airflow for the 0°C to 55°C exit-air limit.
The Motorola VME MVME162P-344SE MVME162P4 VME Embedded Controller is listed as Active / Available from OEM. Contact Apter Power for quotation, official documentation, and configuration review.
Motorola VME MVME162P-344SE MVME162P4 VME Embedded Controller Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola VME MVME162P-344SE MVME162P4 VME Embedded Controller Specs
General
- ManufacturerMotorola VME
- ModelMVME162P-344SE
- ConditionNew Original ready stock
- Product FamilyMVME162P4
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Onboard memory resources
- Main memory: 16MB synchronous DRAM
- Backup memory: 512KB SRAM with battery backup
- Firmware storage: Flash memory for board firmware
- NVRAM / clock: 8KB NVRAM with real-time clock and battery backup
Communication and expansion resources
- Storage: SCSI interface with DMA
- Network: Ethernet transceiver interface
- Serial I/O: Two configurable serial I/O channels
- IndustryPack: Four IndustryPack interface channels
Chassis and commissioning checks
- Platform bus: Use a compatible 6U VMEbus chassis
- Backplane: Verify P1 and P2 connector requirements
- Serial I/O: Confirm transition-module and serial-interface configuration
- Cooling: Provide forced-air cooling for the specified operating range