Features:
- 333 MHz MPC604R processing
- 128MB ECC DRAM capacity
- Scanbe handle configuration
MVME2304-0141 is the highest-memory Scanbe-handle configuration in the documented 333 MHz MPC604R option matrix, providing 128MB ECC DRAM.
The expanded memory is supported by the same Ethernet, flash, PMC, debug, and VMEbus architecture used across the module family.
For migration or replacement, verify that the system needs the 128MB build and Scanbe front panel, then compare PMC hardware, software images, backplane, and airflow.
Apter Power offers sourcing assistance and configuration review for the Motorola MVME2304-0141 VME Processor Module.
Motorola MVME2304-0141 VME Processor Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME2304-0141 VME Processor Module Specs
General
- ManufacturerMotorola VME
- ModelMVME2304-0141
- ConditionNew Original ready stock
- Product FamilyMVME2300 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
High-memory Scanbe configuration
- Processor: The high-memory option uses a 333 MHz MPC604R for MVME2304-0141.
- Main memory: The largest memory tier provides 128MB ECC DRAM.
- Firmware: The high-memory configuration keeps firmware separate in 5MB of onboard flash.
- Board role: The 0141 module unites the largest memory tier with the Scanbe version of the processor board.
PMC and communication architecture
- Ethernet: The high-memory MVME2304-0141 option retains an integrated Ethernet channel for system communication.
- PMC sites: The 128MB Scanbe version supports two compatible PMC cards selected for the target system.
- Debug port: The high-memory 0141 configuration continues to provide a dedicated board-service port.
- VMEbus: Chassis-level communication for MVME2304-0141 is provided through its VMEbus bridge and connectors.
0141 replacement checks
- Board format: MVME2304-0141 requires enclosure support for the Scanbe handle used by this 128MB configuration.
- Front handle: Motorola specifies a Scanbe handle for MVME2304-0141; keep that mechanical option when matching the enclosure.
- Cooling: The high-memory 0141 option must remain within the MVME2300 forced-air temperature limit.
- Final check: For 0141, verify the 128MB memory tier, Scanbe handle, firmware image, and PMC cards together.