Features:
- 266 MHz MPC750 processor with 1MB backside L2 cache
- 32MB ECC DRAM and 5MB onboard Flash memory
- IEEE 1101 front panel with MVME761 I/O support
This ordering code selects the MVME2700 build that pairs a 266 MHz MPC750 with 32MB ECC DRAM, 5MB Flash, a 1MB backside cache, and IEEE 1101 service handles. The MVME761 designation is important because it defines the expected rear-I/O path.
Within a PowerPlus VME system, the module coordinates local processing, VME transfers, Ethernet, SCSI, serial, parallel, and PMC resources. That combination suits control and communications roles where a single board must connect processor tasks with backplane and peripheral traffic.
When evaluating the part, compare the VME64 backplane, P2 adapter, MVME761 transition hardware, PMC I/O routing, memory map, and PPCBug environment. Confirm forced-air cooling and physical clearance before the board is inserted.
The Motorola MVME2700-1331 VME Processor Module may still be available for quotation and support from Apter Power beyond manufacturer End-Of-Life (EOL).
Motorola MVME2700-1331 VME Processor Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME2700-1331 VME Processor Module Specs
General
- ManufacturerMotorola VME
- ModelMVME2700-1331
- ConditionNew Original ready stock
- Product FamilyMVME2700 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Processor Architecture
- CPU: The 266 MHz MPC750 supplies the main processing resource for the configured module.
- Cache: A 1MB backside L2 cache supports processor access to frequently used code and data.
- Memory: The configuration provides 32MB of ECC DRAM for protected local storage.
- Flash: The documented 5MB Flash resource supports resident firmware and board-level software.
External I/O Arrangement
- Transition I/O: The MVME761 I/O module is the documented external connection path for this ordering configuration.
- Front Panel: The IEEE 1101 front-panel format identifies the mechanical handling arrangement.
- VMEbus: The 6U VME form factor must match the host chassis and backplane.
- Integration: Verify cables, transition hardware, and connector assignments against the Motorola documentation.
Installation Checks
- Cooling: Maintain the forced-air cooling specified for the host VME enclosure.
- Backplane: Confirm slot, system-controller, and backplane compatibility before insertion.
- Firmware: Use a firmware image approved for the installed MVME2700 configuration.
- Handling: Remove chassis power and follow antistatic precautions during installation.