Features:
- MC68030 and MC68882 processor architecture
- Four serial ports with SCSI and parallel I/O
- A32/D32 VMEbus system-controller capability
Motorola MVME147-001 follows the documented MVME147 board architecture, but its exact option set is not enumerated in the retained later ordering table.
MVME147-001 provides the family-level processor, storage-control, communication, timer, and diagnostic resources described by Motorola.
Confirm the full label, memory option, Ethernet presence, ROM and firmware, transition hardware, P1/P2 wiring, and cooling before installation.
The Motorola MVME147-001 MPU VMEmodule may be sourced with official documentation and application-matching support from Apter Power.
Motorola MVME147-001 MPU VMEmodule Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME147-001 MPU VMEmodule Specs
General
- ManufacturerMotorola VME
- ModelMVME147-001
- ConditionNew Original ready stock
- Product FamilyMVME147 Family
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Onboard processing and memory resources
- Processor: MC68030 processing with MC68882 floating-point support.
- Interface: Memory capacity depends on the exact documented model.
- ROM resources: Four 32-pin ROM/PROM/EPROM/EEPROM sockets.
- Backup memory: Battery-backed static RAM and time-of-day clock.
Backplane and peripheral connections
- VMEbus: A32/D32 VMEbus master functions.
- VMEbus 2: A24/D16 operation is also supported.
- Serial communication: Four multiprotocol serial ports through P2.
- SCSI: SCSI DMA and Centronics parallel I/O.
Chassis and commissioning checks
- Backplane: Use both P1 and P2 backplanes as specified.
- Cooling: Provide forced-air cooling within the documented limit.
- ROM resources: Verify system-controller and ROM jumper settings.
- Cabling: Check transition-module cabling before power-up.