- Match the complete DDS02.1-W050-D identity, not only the DDS02.1 housing
- Apply the documented 50 A / 40 A peak / continuous allocation
- Verify Digital Servo Feedback, DIAX supply capacity and the approved software configuration
DDS02.1-W050-D is a Bosch Rexroth/Indramat DIAX02 DDS Drive Controller Basic Unit for modular DIAX motion-control systems.
The air-cooled controller uses a 300 V DC bus and has the same documented peak and continuous allocation: 50 A / 40 A. It uses Digital Servo Feedback; command-interface and firmware functions depend on separately fitted modules.
Before selection or replacement, verify the complete type code, DIAX supply-unit capacity, motor feedback, software module or firmware, command interface, cabinet cooling and approved machine parameter set.
Availability, condition, price, and shipping time for DDS02.1-W050-D are confirmed during quotation.
Bosch Rexroth DDS02.1-W050-D DIAX02 Drive Controller Resources and Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Use only a motor with Digital Servo Feedback
- Match the motor feedback cable, connector and software-module motor data
- Prove feedback direction and motor phasing at low load before production motion
- Identify the installed command-interface plug-in module and its slot
- Keep the axis software module with its matching firmware and parameter set
- Do not infer command-interface compatibility from the basic-unit designation
- Validate the 50 A / 40 A peak / continuous allocation against the real motion cycle
- Confirm DIAX supply-unit capacity, DC-bus stability and simultaneous axis demand
- Keep the documented cooling path clear and place the highest-output controller nearest the supply unit
- Robotic positioning systems
- Automated material-handling systems
- Printing-machine motion control