- Match the complete DKC06.3-040-7-FW type code and firmware before replacement
- Preserve the DeviceNet interface network and command configuration
- Record mains, motor, feedback, brake, DC-bus and parameter data before removal
DKC06.3-040-7-FW is a Bosch Rexroth ecodrive servo drive controller in the ECODRIVE03 DKC family.
Bosch Rexroth Indramat DKC06.3-040-7-FW is a 40 A ECODRIVE servo drive controller with DeviceNet interface, integrated mains power section and separately selected firmware. The complete type code identifies the DKC hardware series, design version, 40 A current class and voltage code 7; the FW suffix means that application firmware is a separate ordered identity and must match the machine project.
Before installation or replacement, verify the complete nameplate, firmware, command interface, mains and DC-bus design, motor, wiring and approved commissioning file.
Availability, condition, price, and shipping time for DKC06.3-040-7-FW are confirmed during quotation.
Bosch Rexroth DKC06.3-040-7-FW ECODRIVE Servo Drive Controller Resources and Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Restore the documented node address and DeviceNet baud rate
- Match scanner assemblies, I/O lengths and EDS project data
- Verify trunk, drop, termination, network power and shield bonding
- Verify mains voltage, branch protection and protective earth
- Review DC-bus sharing, bleeder energy and precharge
- Match motor, feedback, brake and switching-frequency limits
- Prove cyclic DeviceNet data before enabling motion
- Test direction, feedback and safety functions at low load
- Validate positioning, braking, thermal duty and network recovery
- DeviceNet-connected handling and mounting systems
- DeviceNet-controlled packaging and foodstuff machines
- DeviceNet-connected printing and paper-processing axes