- Supplies 65 kW rated and 162 kW maximum power to a 750 V common DC bus
- Handles up to 150 kWs through the 130 kW peak integrated braking path
- Uses order number R911297426 for the complete W0065 supply unit
HMV01.1R-W0065-A-07-NNNN is a Bosch Rexroth IndraDrive M regenerative power supply unit designed for large common-DC-bus axis groups.
Its 94 A line input supports an 87 A DC output, while the wider power section combines line regeneration, high-energy braking and forced cooling for demanding machine cycles.
Before installation or replacement, verify the line conductors and protection, bus bars, regenerative profile, brake-energy limits, M6 protective earth, airflow and firmware-dependent status signals.
Availability, condition, price, and shipping time for HMV01.1R-W0065-A-07-NNNN are confirmed during quotation.
Bosch Rexroth HMV01.1R-W0065-A-07-NNNN IndraDrive M Regenerative Supply Manuals, Product Family, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Design the line path for 94 A rated input and the assigned high-current choke/filter
- Use conductors and branch protection that meet the documented UL connection data
- Connect the 87 A DC output through the approved common-bus bar arrangement
- Use 130 kW as the integrated brake peak, not a continuous value
- Keep regenerated energy within 150 kWs for the documented event
- Apply the 5 Ω resistance and 820 V threshold to the machine-cycle calculation
- Terminate protective earth at the documented M6 connection and torque
- Include the 7.5 A control-voltage inrush when sizing the 24 V source
- Match PLC warning logic to the installed HWI firmware behavior
- Main spindles in milling machines
- Servo-drive power supply for machine-tool axis groups
- Deceleration and energy recovery in printing machines