- Preserve the W0 natural-convection installation rather than adding an LE5 fan
- Apply the documented 20 A peak and 15 A continuous current limits
- Keep the approved MOD13/MOD14 and MAC-motor combination with the axis
TDM3.2-020-300-W0 removes heat by natural convection and has no required LE5 fan unit.
The original technical table assigns this exact configuration 6 kW continuous power and 110 W power loss on a 300 V DC link.
Its cabinet position, vertical clearances and cooling-baffle requirement must be checked independently of the mechanically similar W1 configuration.
Availability, condition, price, and shipping time for TDM3.2-020-300-W0 are confirmed during quotation.
Bosch Rexroth TDM3.2-020-300-W0 AC Servo Drive Module Product Series, Service, Industry Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Do not add an LE5 fan and call the module a W1 variant
- Maintain the documented ventilation clearances
- Use the cooling baffle where the lineup position requires it
- Retain the MOD13/MOD14 identity from the approved axis
- Match motor and drive rating plates before transferring the module
- Preserve zero-point and speed-loop settings
- Confirm the left-edge cooling-baffle rule
- Keep DC-link interconnections within the documented drive package
- Separate power, feedback and controller wiring as shown in the manual
- MAC servo axes whose duty remains within 15 A continuous and 20 A peak
- TDM3.2 cabinet positions designed for unobstructed natural convection
- 300 V modular drive packages retaining the original MOD13/MOD14 configuration