Features:
- Integrated guided motion: The table and pneumatic drive share a compact MXQ assembly.
- Symmetric layout: MXQ8L identifies the mirrored port and body arrangement for the 8 mm size.
- Forty-millimeter travel: Stroke is fixed by the complete model and must match machine clearance.
MXQ8L-40 is a guided air slide table rather than an unguided compact cylinder.
Selection uses combined load factors for mass, static moment and dynamic moment at the real overhang.
Mounting bolts, external alignment and stopping impact must be controlled to protect the guide.
Apter Power can help confirm the SMC MXQ8L-40 MXQ8L Symmetric Air Slide Table, 40 mm Stroke and the documented application details before quotation.
SMC MXQ8L-40 MXQ8L Symmetric Air Slide Table, 40 mm Stroke Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Mass: Include the fixture, fasteners and workpiece in the moving load.
- Overhang: Measure the actual center of gravity from the table reference surfaces.
- Moments: Combine pitch, yaw and roll effects according to the catalog method.
- Speed: Use the intended average and collision speeds in the selection check.
- Flatness: Mount on a surface that does not twist the integrated guide.
- Bolt depth: Follow the drawing because long bolts can contact the guide block.
- Alignment: Avoid forcing external tooling to compensate for machine misalignment.
- Clearance: Verify the full 40 mm stroke and any adjuster projection.
- Speed control: Adjust pneumatic flow to prevent excessive end impact.
- Free travel: Check motion without the load before diagnosing internal binding.
- Leak isolation: Separate valve, tubing and cylinder leakage during troubleshooting.
- Switch position: Re-prove optional end detection after mechanical adjustment.
- Precision transfer: Moves small fixtures on an integrated guided table.
- Pick-and-place axis: Provides compact linear travel where load factors are verified.
- Conveyor positioning: Shifts a pallet stop or locator through a defined 40 mm stroke.
- Exact replacement: Restores a documented symmetric MXQ8L-40 installation.