Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com

ATV930D15N4

/ 4.9
1001 reviews | Need a Specific Revision?
The Schneider Electric ATV930D15N4 is a high-efficiency variable speed drive from the Altivar Process ATV900 series, delivering 15 kW motor control with integrated braking and advanced Ethernet connectivity.
Get a quick price for ATV930D15N4
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for ATV930D15N4

  • Manufacturer:
    Schneider Electric
  • Part Number:
    ATV930D15N4
  • Product Family:
    Altivar Process
  • Product Type:
    Variable Speed Drive
  • Range of product:
    Altivar Process ATV900
  • Network number of phases:
    3 phases
  • Mounting mode:
    Wall mount
  • Continuous output current:
    31.7 A at 4 kHz for normal duty, 23.5 A at 4 kHz for heavy duty
  • [Us] rated supply voltage:
    380...480 V - 15...10 %
  • [Us] rated supply voltage:
    380...480 V
  • Relative symmetric mains voltage tolerance:
    10 %
  • Relative symmetric network frequency tolerance:
    5 %
  • nominal output current:
    31.7 A
  • Motor power kW:
    15.0 kW for normal duty, 11.0 kW for heavy duty
  • IP degree of protection:
    IP21
  • Exchange mode:
    Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
  • Data format:
    8 bits, configurable odd, even or no parity for Modbus serial
  • Type of polarization:
    No impedance for Modbus serial
  • Number of addresses:
    1…247 for Modbus serial
  • Refresh time:
    Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
  • Isolation:
    Between power and control terminals
  • Discrete input number:
    10
  • Discrete input logic:
    16 preset speeds
  • Physical interface:
    Ethernet, 2-wire RS 485
  • Connector type:
    2 RJ45, 1 RJ45
  • Method of access:
    Slave Modbus TCP
  • Transmission rate:
    10, 100 Mbits, 4.8 kbps, 9600 bit/s, 19200 bit/s
  • Transmission frame:
    RTU
  • Number of addresses:
    1…247
  • Data format:
    8 bits, configurable odd, even or no parity
  • Maximum output frequency:
    599 Hz
  • Nominal switching frequency:
    4 kHz
  • Maximum input current:
    27.0 A
  • Maximum output voltage:
    480.0 V
  • Network frequency:
    50...60 Hz
  • Prospective line Isc:
    50 kA
  • Base load current at high overload:
    23.5 A
  • Base load current at low overload:
    31.7 A
  • Insulation resistance:
    > 1 MOhm 500 V DC for 1 minute to earth
  • Relative humidity:
    5…95 % without condensation
  • Weight:
    13.6 kg
  • Estimated shipping dimensions:
    21.1x54.6x23.5cm
  • Tariff Code:
    8537101190
  • Country of origin:
    France
  • Place of shipment:
    Xiamen, Fujian, China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Specifications Upgrades Compatibility Use Cases

Features:

  • Integrated Ethernet IP and Modbus TCP enable advanced connectivity in automation networks.
  • Built-in braking unit improves motor stopping control and system safety.
  • Flexible control with multiple inputs and preset speeds supports diverse industrial applications.
Schneider Electric ATV930D15N4 provides advanced motor control for process-driven industries requiring efficiency and reliability. With its 15 kW capacity, Schneider Electric ATV930D15N4 ensures stable performance across a wide range of applications. The drive operates within standard three-phase voltage ranges, allowing seamless integration into industrial power systems. Its high output frequency capability supports flexible speed control. Schneider Electric ATV930D15N4 is commonly used in applications such as pumping, ventilation, and material handling. Reliable operation contributes to improved productivity.

Communication flexibility is a major advantage of Schneider Electric ATV930D15N4. The drive integrates Ethernet-based communication protocols, enabling real-time data exchange with control systems. Schneider Electric ATV930D15N4 also supports serial communication for compatibility with existing infrastructure. Multiple connection interfaces enhance system scalability. The drive supports both half and full duplex communication modes, improving network performance. Schneider Electric ATV930D15N4 ensures efficient coordination between system components.

Schneider Electric ATV930D15N4 is designed for durability and adaptability in industrial environments. It operates reliably under varying temperature and humidity conditions. The IP21 protection rating supports safe indoor installation. Schneider Electric ATV930D15N4 maintains stable electrical performance with strong insulation and protection features. Its wall-mounted design simplifies installation and maintenance. These characteristics make Schneider Electric ATV930D15N4 a dependable solution for modern industrial motor control systems.

The ATV930D15N4 Schneider Electric Variable Speed Drive may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Schneider Electric ATV930D15N4 Variable Speed Drive Manuals,Datasheets,Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Schneider Electric ATV930D15N4 Variable Speed Drive Specs

General

  • Manufacturer Schneider Electric
  • Model ATV930D15N4
  • Condition New Original ready stock
  • Product Family ATV930D22N4,ATV930C22N4
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
  • Intelligent Connectivity: Built-in dual-port Ethernet interface enables comprehensive digital upgrades at the IoT level.
  • Energy Efficiency Management: Added integrated energy management monitoring for real-time, precise system power consumption calculation.
  • Architecture Optimization: Adopts a full lifecycle predictive maintenance algorithm to significantly improve component lifespan.
  • Safety Performance: Safe Torque Stop (STO) level upgraded to the highest SIL3 safety level.
  • Motor Adaptation: Fully compatible with synchronous, asynchronous, permanent magnet synchronous, and synchronous reluctance motors.
  • Network Expansion: Supports multiple mainstream buses such as Profinet, EtherCAT, and Modbus TCP.
  • Software Integration: Seamlessly integrates with the EcoStruxure platform for one-click cloud asset management.
  • Environmental Adaptability: Meets 3C3 level chemical gas corrosion protection standards, adapting to various harsh operating conditions.
  • Oil/Gas Pump Sets: Used for multi-pump parallel tuning and anti-cavitation control of high-viscosity crude oil transfer pumps.
  • Heavy-duty hoisting: Providing ultimate dynamic limiting and power failure protection in mining hoists.
  • Large fans: Handling multi-speed precise control and downstream start-up of blast furnace induced draft fans in steel plants.
  • Centrifuge clusters: Achieving smooth, rapid braking and energy feedback in pharmaceutical and chemical centrifuges.
Description
Schneider Electric ATV930D15N4 is part of the Altivar Process ATV900 range, engineered for demanding industrial and process applications requiring precise motor control. Operating on a three-phase 380…480 V supply, Schneider Electric ATV930D15N4 supports motor power up to 15 kW under normal duty and 11 kW under heavy duty conditions. The drive delivers consistent output with a nominal current of 31.7 A and supports output frequencies up to 599 Hz. Designed for wall mounting, Schneider Electric ATV930D15N4 offers flexible installation in industrial environments. Its integrated braking unit enhances stopping performance and operational control.

Advanced communication capabilities distinguish Schneider Electric ATV930D15N4 in modern automation systems. The drive supports Ethernet-based protocols including Modbus TCP and Ethernet IP, enabling high-speed data exchange with controllers and supervisory systems. Schneider Electric ATV930D15N4 also includes RS 485 Modbus serial communication, providing compatibility with legacy systems. With transmission rates ranging from 4.8 kbps to 100 Mbits, the drive ensures reliable and flexible communication. The availability of multiple RJ45 connectors supports network integration. These features make Schneider Electric ATV930D15N4 suitable for interconnected industrial processes.

Control flexibility is enhanced through multiple discrete inputs and configurable logic functions. Schneider Electric ATV930D15N4 includes 10 discrete inputs supporting preset speed configurations and control logic. Relay outputs operate with a refresh time of 5 ms, ensuring fast response in control systems. The drive supports both half duplex and full duplex communication modes, improving adaptability to different network architectures. Schneider Electric ATV930D15N4 also maintains electrical isolation between power and control terminals, enhancing system safety. These characteristics enable precise and responsive control in complex applications.

Environmental performance and reliability are key strengths of Schneider Electric ATV930D15N4. The drive operates within temperatures from -15°C to 50°C without derating and up to 60°C with derating. It supports humidity levels from 5 to 95 percent without condensation, ensuring stable operation in industrial environments. With IP21 protection, Schneider Electric ATV930D15N4 is suitable for indoor installations. The drive withstands prospective line short-circuit current up to 50 kA, providing robust electrical resilience. Schneider Electric ATV930D15N4 combines durability and performance for long-term industrial use.
Alternative Names
ATV930DI5N4 ATV93OD15N4 ATV930D22N4  ATV930C22N4  ATV320U22N4C ATV212HD75N4 ATV71HD30N4Z  ATV212HD37N4
Technical notes
The Schneider Electric ATV930D15N4 is a current-production, active variable speed drive rated for 15 kW at 380V-480V, offering long-term lifecycle support and direct compatibility for modern industrial processes.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
How does Schneider Electric ATV930D15N4 handle communication protocols?
Schneider Electric ATV930D15N4 supports Ethernet IP, Modbus TCP, and RS 485 Modbus for flexible system integration.
What power range is supported by Schneider Electric ATV930D15N4?
Schneider Electric ATV930D15N4 supports 15 kW under normal duty and 11 kW under heavy duty conditions.
How does Schneider Electric ATV930D15N4 manage motor control precision?
Preset speed logic and adjustable control parameters provide accurate motor regulation in Schneider Electric ATV930D15N4.
What environmental conditions suit Schneider Electric ATV930D15N4?
Schneider Electric ATV930D15N4 operates within -15°C to 60°C and up to 95% humidity without condensation.

Product Browsing History