Features:
- XC environmental scope: Supports safety-controller deployment where the approved installation requires ABB’s extended-condition design.
- Safety project continuity: Retains the AC500-S engineering and validation workflow.
- Installation-specific selection: Environmental duty, orientation and compatible accessories must be reviewed together.
SM560-S-XC 1SAP380000R0001 is selected for safety-control locations where standard-environment hardware does not satisfy the documented site conditions.
The XC designation does not remove enclosure or derating duties; temperature, moisture, contaminants, connectors and mounting still require engineering control.
Commissioning should combine environmental checks with the full safety-function validation and recovery procedure.
Availability is subject to Apter Power's current inventory and sourcing confirmation.
ABB SM560-S-XC 1SAP380000R0001 AC500-S Safety CPU Manuals, Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB SM560-S-XC 1SAP380000R0001 AC500-S Safety CPU Specs
General
- ManufacturerABB
- ModelSM560-S-XC 1SAP380000R0001
- ConditionNew Original ready stock
- Product FamilyABB AC500-S
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Site profile: Document temperature, humidity and contaminants.
- Enclosure: Match protection and ventilation to the actual exposure.
- Transitions: Prevent condensation during temperature changes.
- Accessories: Use compatible modules, connectors and wiring practices.
- Mounting: Apply the correct horizontal or vertical limits.
- Heat sources: Account for adjacent equipment and cabinet airflow.
- Output loading: Apply documented system derating where required.
- Evidence: Record worst-case cabinet measurements.
- Cold and hot start: Test controlled startup at relevant limits.
- Diagnostics: Verify safety and communication status after transitions.
- Safe response: Repeat affected shutdown and restart tests.
- Records: Add results to the validated safety file.