Features:
- Operates as an Advanced Control Module within the Moore APACS control architecture.
- Links APACS data with compatible devices through documented Modbus or LIL communication paths.
- Uses the visible ROM 3.00 marking to identify the installed firmware baseline.
Siemens Moore 39ACM14CAN places control and communication processing in an APACS rack-mounted module.
Its documented Modbus and LIL paths connect APACS data to compatible Moore controllers and serial devices.
The ROM 3.00 nameplate marking identifies the installed firmware baseline without implying a later ACM+ hardware or software revision.
The Siemens Moore 39ACM14CAN Advanced Control Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens Moore 39ACM14CAN APACS Advanced Control Module Manuals,Guides,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Modbus and LIL connection paths
- Modbus path: The module exchanges controller data with compatible stations through documented Modbus communication.
- LIL path: Local Instrument Link provides the second documented connection route for compatible Moore stations.
- Protocol choice: The installed project and connected station must use the same communication method and addressing.
- Device boundary: Protocol-specific configuration determines which station values can enter or leave APACS.
Values moving between APACS and connected stations
- Station upload: Process and alarm values can move from the connected station into the APACS monitoring path.
- Station command: Authorized data written from APACS can change defined station values such as setpoints or modes.
- Data mapping: The selected Modbus or LIL mapping associates station channels with configured APACS data points.
- Configuration limit: Only mapped parameters and functions documented for the connected station should be assigned.
Nameplate firmware reference
- Visible baseline: The supplied 39ACM14CAN nameplate identifies ROM version 3.00.
- Project check: Configuration files and communication libraries must be reviewed against the installed ROM baseline.
- Version boundary: Later ACM or ACM+ functions are not assigned to this record unless the same ROM and hardware support them.
APACS module identity and documentation boundary
- Module identity: 39ACM14CAN is the complete model visible on the supplied Moore Products nameplate.
- System family: The module belongs to the Moore APACS control architecture.
- Order number: No 16139-68/xx suffix is added because it is not visible in the supplied evidence.
- Manual scope: The official SD39ACM-2 installation manual is referenced by Siemens literature but is not publicly retrievable in the current research.