Features:
- Two integrated radios operate in the 2.4 GHz and 5 GHz bands with three spatial streams.
- Six N-Connect antenna sockets and one X-coded gigabit M12 port form the wireless-to-Ethernet connection path.
- IP65 protection, PoE, and redundant 24 V DC input suit enclosed industrial wireless installations.
Siemens 6GK5788-2GD00-0AB0 is the W788-2 M12 approval variant intended only for operation in the United States.
The access point can also operate in client mode and presents as many as sixteen SSIDs through its managed wireless functions.
Optional KEY-PLUG licensing activates iFeatures, while the separate C-PLUG retains removable device data.
The Siemens 6GK5788-2GD00-0AB0 SCALANCE W788-2 M12 IWLAN Access Point may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6GK5788-2GD00-0AB0 SCALANCE W788-2 M12 IWLAN Access Point Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Wireless Capacity and Bands
- Radio count: Two permanently installed radio modules operate independently.
- Band coverage: Country-approved channels occupy the 2.4 GHz and 5 GHz bands.
- Spatial streams: A 3 x 3 MIMO arrangement provides three streams per radio.
- Gross rate: Each radio supports up to 450 Mbit/s.
Sealed Data and Supply Connections
- Ethernet: One X-coded M12 interface carries 10, 100, or 1000 Mbit/s traffic.
- PoE path: The Ethernet interface accepts IEEE 802.3at Type 1 or Type 2 power.
- Direct input: An A-coded M12 connector accepts redundant 24 V DC supply wiring.
- Protection: Locked M12 connections preserve the IP65 enclosure boundary.
Stored Configuration and Licensed Functions
- C-PLUG: Removable storage holds the device configuration record.
- KEY-PLUG: The optional license carrier enables supported industrial wireless iFeatures.
- iPCF modes: iPCF and iPCF-MC access-point functions require the appropriate KEY-PLUG.
- Mode scope: The device can operate as an access point or an IWLAN client.
Approval and Security Boundary
- Regional use: The 0AB0 version is approved only for operation in the United States.
- Radio identity: The product record includes FCC ID LYHMPCIE1V1.
- Wireless security: WPA, WPA2, IEEE 802.11i, and RADIUS protect network access.
- Administration: HTTPS and SSH provide protected management sessions.