Features:
- Delivers a regulated 300 W output for SCALANCE X-500 rack equipment.
- Offers both direct rack power transfer and a secondary 24 V screw-terminal connection.
- Restarts automatically after the electronic short-circuit shutdown condition clears.
Siemens 6GK5598-1AA00-3AA0 supplies the DC bus used by compatible devices in the SCALANCE rack.
The wide-range mains input, isolated converter and safety-extra-low-voltage output form a single controlled energy path.
An IEC input connection and one-rack-unit housing establish the physical boundary for installation and cable routing.
The Siemens 6GK5598-1AA00-3AA0 SCALANCE PS598-1 Rack Power Supply is supported for quotations and documentation by Apter Power while OEM availability remains active.
Siemens 6GK5598-1AA00-3AA0 SCALANCE PS598-1 Rack Power Supply Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
From Mains Connection to Conversion
- Input Source: A single-phase 85 to 264 V AC source enters through the IEC input connection.
- Conversion Stage: The isolated converter stage changes the incoming mains supply to regulated 24 V DC.
- Input Range: The wide input range allows one supply configuration across the documented line-voltage span.
Rack and Terminal Outputs
- Rack Output: The primary 24 V path feeds compatible SCALANCE X-500 equipment directly through the rack.
- Screw Terminal: A secondary screw terminal provides another connection point for the same regulated output.
- Parallel Arrangement: Two PS598-1 units can be arranged in parallel when the system design calls for paired supplies.
Short-Circuit and Status Behavior
- Short-Circuit Action: An output short circuit triggers electronic shutdown of the power stage.
- Restart Behavior: Automatic restart follows after the short-circuit condition is removed.
- Status Indication: Separate front indications distinguish a valid 24 V output from a power-supply fault.
Mechanical Connection in the X-500 Rack
- Rack Format: The 19-inch housing occupies one rack unit and aligns with the SCALANCE rack format.
- Rack Contact: Direct rack contact provides the electrical path to the installed network equipment.
- Enclosure Boundary: The IP20 boundary places connectors and live wiring inside the controlled enclosure.