Features:
- Kinetix 5100 200 V-class configuration for 2198-E2030-ERS
- Dual-port EtherNet/IP connectivity for the documented drive network
- Safe Torque Off (STO) for the documented safety circuit
Allen-Bradley
2198-E2030-ERS accepts 170...253 V rms three-phase input and provides 3.00 kW with 17.9 A rms continuous output.
The Kinetix 5100 platform supports standalone single-axis motion control with standard drive I/O and network access.
Confirm the motor and feedback combination, control method, connector kit, cable set, branch protection, grounding, enclosure cooling, regeneration, and STO wiring before selection or replacement.
Availability, condition, price, and shipping time for 2198-E2030-ERS are confirmed during quotation.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The drive display presents status information for local review
- Fault and alarm codes are documented in the Kinetix 5100 user manual
- KNX5100C Drive Configuration software supports parameter monitoring and diagnostic review
- The motor-feedback connection supports the matched motor feedback interface
- An auxiliary-feedback connection is provided for the documented encoder input
- Motor, feedback, connector-kit, and cable catalog numbers must be matched with Rockwell Automation selection data
- ControlFLASH Plus software is supported for upgrading Kinetix 5100 drive firmware
- ControlFLASH software is also documented as a firmware-upgrade method
- Inhibit the module before the upgrade and verify the installed firmware after the procedure
- Standalone positioning control through pulse-train commands
- Standalone speed or torque control through analog input
- Stored-position indexing sequences through digital I/O