Features:
- 6SE7032-2EE85-1JA0 carries the TSE1 spare identity for the A601 snubber RC network.
- The module is assigned to two specific Design E rectifier/regenerating unit orders.
- The 1JA0 spare suffix differs deliberately from the 1AA0 endings of the complete feed units.
The TSE1 designation and A601 equipment identifier are complementary checks for 6SE7032-2EE85-1JA0. One names the module family; the other fixes its location in the documented power section.
The where-used table limits the order number to 6SE7031-7EE85-1AA0 and 6SE7032-2EE85-1AA0. Matching only the 6SE7032 prefix would ignore the feed-unit suffix and the assigned snubber network.
A23 and A601 appear as separate equipment in the same power-section documentation. Keeping those identifiers distinct prevents the snubber board from being misclassified as a power-interface PCB.
The Siemens 6SE7032-2EE85-1JA0 TSE1 Snubber Circuit Capacitor Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6SE7032-2EE85-1JA0 TSE1 Snubber Circuit Capacitor Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Snubber Network Identity
- Module name: TSE1 identifies the snubber circuit capacitor assembly
- Circuit role: The A601 board is designated as a PCB snubber RC network
- Power context: The module belongs to the power section rather than the control electronics
- Order identity: 6SE7032-2EE85-1JA0 is the spare number attached to this A601 function
Equipment Location
- Identifier: A601 is the equipment reference assigned to the snubber network
- Board code: The schematic labels A601 with the base code C98043-A1683
- Adjacent assembly: A23 power-interface boards are drawn separately from the A601 network
- Reading method: Both the A601 label and full 1JA0 order suffix should agree before selection
Documented Where-Used Boundary
- First unit: 6SE7031-7EE85-1AA0 uses 6SE7032-2EE85-1JA0 at A601
- Second unit: 6SE7032-2EE85-1AA0 carries the same A601 spare assignment
- Design class: Both references belong to Design E feed-unit power sections
- Exclusion: No other 6SE7032 prefix alone establishes compatibility with the 1JA0 module
Feed-Unit Electrical Frame
- Supply range: The host feed design is classified for 380–480 V three-phase input
- Frequency range: The specified feed-unit context is 50/60 Hz
- DC section: Power drawings place A601 within the same section as the C/L+ and D/L− DC-link terminals
- Rating boundary: Host-unit voltage and current classes are not individual capacitor-component ratings