Features:
- Interface Between the Universal AC Power Source and SINAMICS G120 Drive System
- Integrates AC/DC Power Conversion with Advanced Motor Control Capability
- Operates in Conjunction with the CU250S-2 and CU240E-2 Control Units
The 6SL3210-1PE31-8AL0 operates as the Power Module in the SINAMICS G120 series, providing reliable AC power conversion and motor control for all connected drive applications. It continuously converts incoming AC power (3AC 380-480V, 47-63 Hz) to regulated variable-frequency output and distributes this power to the motor to support steady state operation of all industrial machinery and process equipment. Seamless motor control is standard with the 6SL3210-1PE31-8AL0, however using an optional Safe Torque Off (STO) safety function will allow immediate shutdown capability in the event of an emergency stop condition.
The 6SL3210-1PE31-8AL0 provides essential power functions common to the entire drive system, and is a critical component of the motor control path, directly affecting the proper, normal operation of the overall automation system. One 6SL3210-1PE31-8AL0 power module is required per motor drive depending on the desired power rating.
For high-availability applications, the SINAMICS G120 system supports redundant drive configurations through parallel 6SL3210-1PE31-8AL0 installations or integration with higher-level control architectures. In addition to standard single drive operation, the system configuration also performs automatic fault detection. The SINAMICS G120 drive configuration executes protection using the internal circuitry specified in the power module options.
The 6SL3210-1PE31-8AL0 SIEMENS Power module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
SIEMENS 6SL3210-1PE31-8AL0 Power module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
SIEMENS 6SL3210-1PE31-8AL0 Power module Specs
General
- Manufacturer SIEMENS
- Model 6SL3210-1PE31-8AL0
- Condition New Original ready stock
- Product Family 6SL3246-0BA22-1FA0,6SL3200-0SM11-0AA0
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Pumping Systems: Runs high-capacity centrifugal pumps for industrial fluid distribution.
- Ventilation Control: Powers massive ventilation blowers and factory exhaust fans.
- Material Conveying: Operates continuous industrial conveyors and logistics sorting lines.
- Processing Equipment: Drivers large mixers, industrial mills, and manufacturing extruders.
- Safety Integration: Supports functional safety systems when combined with compatible control units.
- Enclosure Rating: Meets IP20 ingress standards, requiring an external protective cabinet.
- Ambient Temperature: Operational from -20 °C up to 40 °C under continuous low overload.
- Altitude Limits: Performs up to 1,000 meters above sea level without power derating.
- Humidity Levels: Tolerates up to 95% relative humidity without any active condensation.
- Thermal Ventilation: Demands forced air cooling clearance supporting 0.153 cubic meters per second.
- Energy Rating: Delivers 98% operational efficiency, achieving European IE2 efficiency classification.
- Power Output: Supplies 90 kW for low overload or 75 kW for high overload.
- Line Interference: Reduces harmonic distortion using an integrated Class A line filter.
- Braking Capacity: Manages regeneration using a built-in braking chopper for rapid deceleration.
- Electrical Metrics: Achieves a 0.95 power factor with a 2.33 kW thermal power loss.