Features:
- Horizontal SINUMERIK 828D PPU 241.2 BASIC T control unit for turning
- 8.4-inch color operator display with integrated horizontal keyboard
- Three DRIVE-CLiQ interfaces for the 828D drive architecture
Siemens 6FC5370-3AT20-0AA0 places the PPU 241.2 BASIC T turning control at the operator side of a SINUMERIK 828D station.
The horizontal panel arrangement keeps the display, keyboard and CNC operating functions together at the machine interface, so the operator can work from the intended turning-control position.
Its control-side interface and documented capacity limits give the system designer the boundaries for connecting drives, peripheral modules and motion resources.
The Siemens 6FC5370-3AT20-0AA0 SINUMERIK 828D PPU 241.2 BASIC T horizontal panel processing unit may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
修改
Siemens 6FC5370-3AT20-0AA0 SINUMERIK 828D PPU 241.2 BASIC T horizontal panel processing unit Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Turning Control Function
- Control role: Siemens 6FC5370-3AT20-0AA0 is the operator-facing PPU for the SINUMERIK 828D BASIC T turning configuration.
- Machine task: The panel presents CNC operation and programming functions for the documented turning variant.
- Panel orientation: The PPU 241.2 format uses the horizontal keyboard arrangement.
- System position: The PPU sits at the control-panel side of the 828D station rather than serving as a standalone drive module.
Panel Operation
- Visual access: The 8.4-inch color display keeps CNC screens visible from the horizontal operator position.
- Keyboard entry: The integrated horizontal keyboard provides the local input path for operator commands and program work.
- Single station: Siemens 6FC5370-3AT20-0AA0 combines the operator display and PPU control functions in one panel assembly.
- Selection check: Choose the horizontal 241.2 format when the machine panel layout requires the BASIC T turning orientation.
Drive-Link Arrangement
- Connection path: The DRIVE-CLiQ ports on Siemens 6FC5370-3AT20-0AA0 form the control-side link to the documented drive architecture.
- Interface planning: Reserve the PPU DRIVE-CLiQ connections for the control and drive devices assigned by the 828D design.
- Signal boundary: DRIVE-CLiQ carries the control communication path; it is not the 24 V DC power entry.
- Commissioning focus: Verify the planned drive chain against the PPU interface assignment before panel wiring.
Motion and PLC Planning
- Axis allocation: The BASIC T configuration starts with three axes/spindles and allows up to five in the documented PPU class.
- Interpolation: The control configuration permits up to four interpolating axes for the motion plan.
- Peripheral boundary: Keep the connected peripheral-module plan within the documented maximum of three modules.
- PLC coordination: The 9 ms PLC cycle and 1 MB buffered CNC user memory define the planning baseline for Siemens 6FC5370-3AT20-0AA0.