Features:
- Controls single-acting pneumatic actuators through 1/2-14 NPT and 1/4-18 NPT connections with intrinsic safety (Ex i) construction.
- Accepts 0/4–20 mA in 2-, 3- or 4-wire operation with HART while retaining the selected single-acting output stage.
- Uses a polycarbonate enclosure with automatic initialization and intrinsic safety (Ex i) protection.
6DR5210-0EN00-0AA0 is the complete ordering identity for the configuration defined by single-acting HART electronics with NPT threads and Ex i protection.
It compares the controller command with valve travel and meters instrument air so the connected actuator follows the requested position.
Before commissioning, verify actuator action, HART electronics or NPT thread standard against the installed equipment and project documentation.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Siemens 6DR5210-0EN00-0AA0:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The single-acting HART and Ex i valve-positioning configuration positions pneumatic control valves used in flow, pressure, temperature or level-regulation loops.
- The single-acting HART and Ex i valve-positioning configuration supports compatible linear and part-turn actuators when action, linkage geometry and air supply are engineered correctly.
- The single-acting HART and Ex i valve-positioning configuration provides local commissioning and valve-condition diagnostics for a verified actuator and control-system interface.
- The selected protection statement is intrinsic safety (Ex i), as defined by the exact order number.
- Any approval is valid only with certified entries, associated apparatus and nameplate temperature limits.
- The base PS2 family designation alone is insufficient to claim hazardous-location acceptance.
- The positioner accepts the documented 0/4–20 mA in 2-, 3- or 4-wire operation setpoint from a compatible process controller.
- Parameter access uses HART where provided by this electronics version.
- Mechanical feedback geometry must be coordinated with the valve actuator and mounting kit.
- The selected construction is intrinsic safety (Ex i) and must not be upgraded by assumption from another PS2 suffix.
- Fail-safe behavior and pneumatic exhaust response are proved with the connected actuator before service.
- Covers, cable entries and air connections must be secured before applying power or instrument air.