- Series C drive designed for one 380...460 V three-phase motor circuit
- Voltage-dependent current ratings require selection from the actual installed supply
- Parameter-based control and protection settings define the machine response
Allen-Bradley
1305-BA06A is applied as a Bulletin 1305 motor-speed controller where the usable current rating is selected from the installation voltage.
Its regenerative load, braking hardware, motor overload values, PWM setting, and enclosure cooling must be evaluated as one drive system.
A replacement review should preserve the parameter backup and compare Series C firmware, control terminals, filter and panel hardware, grounding, and motor data.
Availability, condition, price, and shipping time for 1305-BA06A are confirmed during quotation.
Allen-Bradley 1305-BA06A Bulletin 1305 AC Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Deceleration time must be checked against the machine regenerative-energy profile
- Dynamic-braking hardware is selected from the drive and duty-cycle requirements
- Braking parameters must be preserved or revalidated during migration
- 1305-RFB-08-B is the documented RFI filter for the BA06A drive
- 1305-MP-08-B is the matching panel kit
- Grounding and motor-cable routing must follow the official filter instructions
- Published power dissipation is 73 W at rated operation
- PWM carrier settings above 4 kHz require output-current derating
- Ambient operation from 40...50 °C requires the documented thermal derating
- Variable-speed control of compatible 2.2 kW three-phase AC motor loads
- Applications requiring the installed supply voltage to be matched to the published current rating
- Retrofit or migration work using the official Bulletin 1305 system guidance