Features:
- Bridge Between Mechanical Vibration Sources and Industrial Monitoring Systems
- Integrates High-Sensitivity Piezoelectric Measurement with Extreme Environmental Tolerance
- Functions Alongside Standard Condition Monitoring and Predictive Maintenance Platforms
The Vibro-Meter CA202 144-202-000-205 piezoelectric accelerometer serves as a high-sensitivity vibration sensor in industrial monitoring applications, providing reliable vibration data to all connected acquisition systems. It continuously converts mechanical vibration energy into precise electrical charge signals (100 pC/g) across a broad frequency range (0.5 to 6000 Hz) and transmits these signals through its integral low-noise cable to support steady state operation of all monitoring and analysis modules.
The CA202 144-202-000-205 provides essential vibration sensing functions common to the entire monitoring system, and is a critical component of the machinery protection path, directly affecting the proper, normal operation of the overall condition monitoring system. One or multiple CA202 144-202-000-205 accelerometers are required per machine train depending on the desired monitoring coverage level. The CA202 144-202-000-205 occupies a compact mounting footprint on the machinery surface and is always located at the designated measurement points (bearing housings, casings, or structural positions).
For Dual Redundant Monitoring applications, the vibration monitoring system requires a second CA202 144-202-000-205 accelerometer module installed at the redundant measurement location. In addition to standard single sensor operation, the redundant configuration also performs automatic signal comparison. The CA202 144-202-000-205 dual sensor configuration executes failover using the internal circuitry specified in the monitoring system options.
The CA202 144-202-000-205 Vibro-Meter piezoelectric accelerometer may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Vibro-Meter CA202 144-202-000-205 piezoelectric accelerometer Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Vibro-Meter CA202 144-202-000-205 piezoelectric accelerometer Specs
General
- Manufacturer Vibro-Meter
- Model CA202 144-202-000-205
- Condition New Original ready stock
- Product Family CA303 144-303-000-011,CA306 144-306-000-321
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Power Generation Turbines: Continuous vibration monitoring of gas and steam turbines.
- Industrial Rotating Machinery: Diagnostics for large fans, pumps, compressors, and motors.
- Petrochemical Equipment: Machinery protection in aggressive chemical processing plants.
- Aerospace Flight Testing: Component monitoring in high-temperature engine test cells.
- Heavy Manufacturing: Predictive maintenance for gearboxes and structural systems.
- Operating Temperature: Main sensor operates from −55 °C to +260 °C.
- Cable Temperature: Integrated cable withstands temperatures up to +200 °C.
- Housing Material: Austenitic stainless steel (grade 1.4441) case material.
- Enclosure Sealing: Hermetically welded construction with IP67 protection rating.
- Mechanical Protection: Low-noise cable enclosed in a flexible stainless steel hose.
- Hazardous Areas: Certified for use in potentially explosive atmospheres.
- Ex Certifications: Complies with ATEX and IECEx intrinsic safety standards.
- EMC Compliance: Meets EN 61000-6-2 and EN 61000-6-4 for electromagnetic resistance.
- Global Standards: Carries CE marking, EAC conformity, and RoHS environmental directives.