Features:
- Sixteen sourcing outputs: The channels serve 24 V DC loads in two groups of eight.
- Protected drivers: Current limiting and thermal and voltage protections are documented.
- Defined error behavior: OSP supports predetermined output states under specified faults.
This ordering code identifies the transistor current-sourcing output configuration, not the isolated relay output DO820.
The module switches DC field loads and reports output, process-voltage, and protection diagnostics through the S800 system.
Review steady current, inrush, inductive suppression, group supply, OSP configuration, MTU, and field protection before energizing.
Availability is subject to Apter Power inventory and sourcing confirmation.
DO810 3BSE008510R1 Manuals, Datasheets, and Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
DO810 3BSE008510R1 S800 I/O 24 V DC Digital Output Module Specifications
General
- ManufacturerABB
- ModelDO810 3BSE008510R1
- ConditionNew and factory sealed
- Product FamilyABB S800 I/O
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
24 V DC load planning
- Current: Confirm steady and inrush current for every load.
- Load type: Review inductive, resistive, and electronic loads separately.
- Supply range: Keep the field supply inside the ABB-documented range.
- Group total: Check the combined demand for each group of eight.
Driver fault checks
- Short circuit: Remove the field fault before resetting the channel.
- Overtemperature: Check load and cabinet temperature before restart.
- Overvoltage: Review supply and inductive suppression.
- Process power: Confirm each group supervision input and alarm path.
Output checkout
- Safe state: Verify the approved OSP behavior before live testing.
- Point test: Operate one field load at a time.
- Feedback: Confirm the physical response and any return indication.
- Alarm test: Validate group power and channel fault reporting.