Features:
- Specifically designed for CI858K01 and CI872K01 modules; provides mechanical mounting and electrical termination for DDCS fiber optic communication.
- The TP858-3BSE018138R1 is a passive termination unit – it contains no active electronic components such as processors, memory, or optocouplers.
- This means it has no firmware, no software configuration, and no power consumption.
The TP858-3BSE018138R1 is a baseplate specifically engineered for ABB’s DDCS (Direct Digital Control System) interface modules CI858K01 and CI872K01. DDCS is a high‑speed fiber optic communication protocol used primarily in ABB drive systems (e.g., ACS800, ACS6000) to connect controllers to drives. The baseplate provides the mechanical mounting platform and the electrical termination for these modules. Without this baseplate, the DDCS interface module cannot be installed in the Advant subrack.
The TP858-3BSE018138R1 is a passive termination unit – it contains no active electronic components such as processors, memory, or optocouplers. This means it has no firmware, no software configuration, and no power consumption. Its only functions are mechanical support and signal routing. The passive design makes it extremely reliable; there are no active components to fail. Its dimensions are not specified in this document, but typical ABD baseplates are compact, fitting into standard Advant subracks.
The TP858-3BSE018138R1 is maintained as a new spare part (not refurbished) in ABB’s global warehouse network. For engineers, this global availability is critical when maintaining legacy systems. A failed baseplate could otherwise ground a production line. The product is not within WEEE scope, simplifying disposal. The product is listed under ABB’s Advant product family, confirming its compatibility with Advant OCS and related systems.
The TP858-3BSE018138R1 ABB Baseplate may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL)by the manufacturer (OEM).
ABB TP858-3BSE018138R1 Baseplate Manuals,
Datasheets,Drivers,Link
Important Notice:Other accessories,manuals,cables,calibration data,software,etc.are not
included with this equipment unless listed in the above stock item description.All prices are
shown in USD.
ABB TP858-3BSE018138R1 Baseplate Specs
General
- Manufacturer ABB
- Model TP858-3BSE018138R1
- Condition New Original ready stock
- Product Family
DSQC406,DSQC503,DSQC 539,DSQC541
Important Notice:Other accessories,manuals,cables,calibration data,software,etc.are not
included with this equipment unless listed in the above stock item description.All prices are
shown in USD.
- High-Performance Drive Integration: Providing the base for the CI858 module to enable DriveBus communication between AC 800M controllers and ABB premium drives.
- Coordinated Motion Control: Used in industries like Metals, Pulp & Paper, and Cranes, where precise, high-speed synchronization between multiple motors and the controller is required.
- Communication Expansion: Housing CEX-Bus interfaces to extend the controller's connectivity to various fieldbus protocols.
- CE Marking: Meets European directives for safety and EMC (Electromagnetic Compatibility) (EN 61000-6-2/4).
- Safety Approvals: UL and CSA certified for electrical safety in North American industrial markets.
- Marine Certifications: Typically carries approvals from major societies like DNV, ABS, and GL, making it suitable for maritime and offshore applications.
- Hazardous Areas: Compliant with ATEX and IECEx for Zone 2 environments when installed according to specific system guidelines.
- Controller Compatibility: Works seamlessly with all AC 800M processor units (e.g., PM851, PM860, PM864, PM866, PM891).
- Module Pairing: Specifically designed to host the CI858 communication module. It provides the bridge between the module's circuitry and the controller’s CEX-Bus.
- CEX-Bus Positioning: TP858 baseplates are mounted to the left of the CPU.
- Daisy-Chaining: Multiple baseplates can be connected horizontally to add various protocols (PROFIBUS, MODBUS, DriveBus) to a single controller.