- ABB identifies 07 NG 61 R1 as a Procontic T200 power supply unit
- 115/230 V AC input with 5 V DC 4 A and 24 V DC 1.5 A outputs
- Input selection and output loading must match the installed power distribution
07 NG 61 R1 is an ABB Procontic T200 power supply unit for control-system power distribution.
The cataloged arrangement accepts 115/230 V AC and provides separate 5 V DC 4 A and 24 V DC 1.5 A outputs for the connected equipment.
Before replacement, verify the selected AC input, output loading, chassis wiring, grounding, and the complete product label.
Availability, condition, price, and shipping time for 07 NG 61 R1 are confirmed during quotation.
ABB 07NG61R1 ABB Procontic Manuals, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Match the 115/230 V AC input selection to the installed cabinet supply
- Reserve the 5 V DC 4 A output for the documented logic load
- Check the 24 V DC 1.5 A output against connected auxiliary loads
- Keep AC input conductors and DC output wiring identified at the power unit
- Route the 5 V DC and 24 V DC outputs to their documented load groups
- Confirm protective earth, terminal polarity, and chassis clearances before energizing
- Verify the complete 07 NG 61 R1 label and the selected 115/230 V AC setting
- Compare measured 5 V DC and 24 V DC rails with the connected load requirements
- Record the wiring and load checks before returning the Procontic system to service
- Control-cabinet power distribution in ABB Procontic T200 installations
- Separate low-voltage supply for logic equipment and 24 V DC auxiliary circuits
- Replacement planning where the original input selection and output load are documented