Features:
- Base-axis assignment: ABB lists the motor for IRB 2600 axis 1
- Type C configuration: the installed generation is part of the service decision
- Pinion included: the official spare description covers the drive pinion
3HAC047586-002 carries the IRB 2600 first-axis load through a dedicated motor-and-pinion assembly.
Its Type C marking separates this configuration from other motor generations that may look similar in the same robot family.
Base-axis calibration and brake evidence should stay attached to the job from diagnosis to restart.
Apter Power can review the full 3HAC047586-002 label, base-axis identity, motor type, condition record, and quotation requirements.
ABB 3HAC047586-002 IRB 2600 Axis-1 Motor Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Installed position: ABB identifies axis 1 as the service location.
- Robot platform: the documented mechanical unit is IRB 2600.
- Finish: ABB Orange forms part of the listed configuration.
- Assembly description: the motor is supplied including pinion.
- Interface record: document pinion wear and the mating drive condition.
- Receiving control: reject a motor-only scope when the order calls for the listed assembly.
- Configuration record: retain evidence that the installed motor is Type C.
- Brake check: document holding and release behavior after service.
- Motion check: complete calibrated, low-speed axis-1 movement before production release.
- IRB 2600 axis-1 repair: renew the documented base-axis Type C motor.
- Base-drive overhaul: inspect the motor and pinion interface as one service scope.
- Generation-controlled maintenance: assess motor type before approving a substitute assembly.