Features:
- 16 MHz MC68030 with 4 MB shared DRAM
- No memory parity and no onboard Ethernet
- SCSI DMA with four serial channels
Motorola MVME147-010 is the 16 MHz, 4 MB configuration documented without parity or onboard Ethernet.
MVME147-010 combines VMEbus control, SCSI storage access, serial and parallel communication, timers, and 147Bug service functions.
Verify non-Ethernet requirements, memory map, backplanes, transition-module cabling, firmware, jumpers, and airflow before installing MVME147-010.
The Motorola MVME147-010 MPU VMEmodule may be sourced with official documentation and application-matching support from Apter Power.
Motorola MVME147-010 MPU VMEmodule Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME147-010 MPU VMEmodule Specs
General
- ManufacturerMotorola VME
- ModelMVME147-010
- ConditionNew Original ready stock
- Product FamilyMVME147 Family
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Onboard processing and memory resources
- Processor: MC68030 processing with MC68882 floating-point support.
- Main memory: 4 MB shared DRAM for this ordering code.
- ROM resources: Four 32-pin ROM/PROM/EPROM/EEPROM sockets.
- Backup memory: Battery-backed static RAM and time-of-day clock.
Backplane and peripheral connections
- VMEbus: A32/D32 VMEbus master functions.
- VMEbus 2: A24/D16 operation is also supported.
- Serial communication: Four multiprotocol serial ports through P2.
- SCSI: SCSI DMA and Centronics parallel I/O.
Chassis and commissioning checks
- Backplane: Use both P1 and P2 backplanes as specified.
- Cooling: Provide forced-air cooling within the documented limit.
- ROM resources: Verify system-controller and ROM jumper settings.
- Cabling: Check transition-module cabling before power-up.