- Bulletin 1305 speed control for a three-phase induction motor
- SCANport supports documented operator-interface and communication adapters
- The final A enclosure code identifies the NEMA Type 1 (IP30) configuration
Allen-Bradley 1305-BA09A is the highest-output catalog number in this 380/460 V Bulletin 1305 rating group.
Its controller selection, acceleration and deceleration settings, braking method, and PWM carrier setting must be coordinated with the connected motor and load.
Confirm the complete catalog number, installed hardware Series, firmware level, terminal functions, SCANport accessories, protection, grounding, and cabinet ventilation before commissioning.
Availability, condition, price, and shipping time for 1305-BA09A are confirmed during quotation.
Allen-Bradley 1305-BA09A Bulletin 1305 AC Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Two-wire or three-wire control wiring can be selected for the required machine circuit
- Preset speeds and analog speed references are configured through the documented parameter set
- The combined SCANport accessory load must not exceed 250 mA
- DC braking settings are available through the documented drive parameters
- Dynamic-brake hardware must be selected for the actual motor and regenerative duty
- Stopping performance must be verified with the connected load rather than assumed from the drive rating alone
- The RFI filter is installed between the incoming AC supply and the drive
- Rockwell Automation recommends filtering where sensitive equipment shares the supply or long motor leads are used
- The filter must be mounted close to the drive with a solid ground connection
- Variable-speed control of a correctly sized three-phase induction motor
- 380/415/460 V machine systems within the published input range
- Installations requiring a NEMA Type 1 enclosure and documented Bulletin 1305 controls