- Supports documented single-phase and three-phase input arrangements
- Programmable motor-control parameters adapt the drive to the connected machine
- The final A catalog code identifies the compact NEMA Type 1 (IP30) enclosure
Allen-Bradley 1305-AA04A must be selected using the input phase as well as the motor requirement because its published rating changes with the supply arrangement.
The original parameter record defines the machine command source, speed reference, acceleration and deceleration, frequency limits, motor protection, and fault behavior.
Before commissioning, compare the complete catalog number, hardware Series, firmware, motor data, terminal wiring, external adapters, protection, grounding, and ventilation with the approved machine documentation.
Availability, condition, price, and shipping time for 1305-AA04A are confirmed during quotation.
Allen-Bradley 1305-AA04A Bulletin 1305 AC Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The A voltage code supports documented single-phase and three-phase supply arrangements
- Single-phase operation uses a lower published motor and output-current rating
- The configured motor data and protection settings must match the selected input condition
- A Frame A RFI filter is selected and installed according to the Rockwell Automation instructions
- The filter is placed between the incoming AC supply and the drive
- A short mounting path and solid grounding are required for effective filtering
- The NEMA Type 1 enclosure is intended for the mounting environment defined in the manual
- Required top, bottom, and side clearances must be maintained for cooling
- Mounting orientation and enclosure temperature determine whether output-current derating is required
- Single-motor speed control from a documented 200/230 V supply
- Applications where the motor rating is selected separately for single-phase or three-phase input
- Compact machine installations using Bulletin 1305 parameter-based control