- Series C Bulletin 1305 variable-frequency motor controller
- IP30 NEMA Type 1 base enclosure with optional human-interface configurations
- Programmable output and control functions support application-specific setup
Allen-Bradley
1305-AA02A controls one AC motor from a 200...230 V installation, with the permissible motor loading determined by the input phase.
Its Series C parameter set, control terminals, braking arrangement, and optional human-interface hardware must be documented before replacement.
Migration planning should compare the installed RFI filter, mounting panel, motor protection, parameter backup, enclosure ventilation, and control wiring.
Availability, condition, price, and shipping time for 1305-AA02A are confirmed during quotation.
Allen-Bradley 1305-AA02A Bulletin 1305 AC Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Output frequency is programmable from 0 to 400 Hz
- Output voltage is adjustable from 0 V to the applied input voltage
- Motor full-load current must not exceed the applicable drive output-current rating
- 1305-RFB-05-A is the documented RFI filter for this drive size
- 1305-MP-05-A is the matching panel-mount kit
- Filter grounding and cable routing must follow the official installation instructions
- Operation above 40 °C requires the documented current derating
- The maximum documented operating ambient is 50 °C under the stated conditions
- PWM carrier settings above 4 kHz also require output-current derating
- Variable-speed control of a compatible three-phase AC motor
- Low-power installations supplied from either documented single-phase or three-phase input
- Retrofit projects evaluated with the official Bulletin 1305-to-PowerFlex migration guidance