Features:
- Provides the system module for a Series C GMC Turbo multi-axis drive.
- Offers the documented Remote I/O and AxisLink interfaces.
- Supports configurations controlling up to four physical axes.
The current catalog configuration is the Series C 10 kW-class GMC Turbo system module with the T-RL option. Verify the complete nameplate code before ordering.
It coordinates compatible 1394 axis modules and provides the system-level control and power-conversion functions used in a multi-axis installation.
Before replacement, confirm the axis-module arrangement, feedback and I/O wiring, controller connection, stored application, braking circuit and cabinet supply requirements.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Allen-Bradley 1394C-SJT10-T-RL:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Coordinates compatible 1394 axis modules as part of a GMC Turbo multi-axis motion system.
- Links motion control to an SLC 5/03, 5/04, or 5/05 controller through the documented backplane interface.
- Supports machine-axis arrangements that use the 1394 system module with application-matched axis modules.
- AxisLink supports multi-node communication when compatible system modules use the documented firmware.
- Configure the AxisLink cable length, node addresses and end-of-line termination within the manual limits.
- The GMC Turbo architecture also documents Remote I/O and a direct SLC backplane interface with its specified cable.
- Retain the existing GMC Turbo application and documented control-memory contents before removing the installed module.
- Recreate the axis configuration to match the connected 1394 axis modules and feedback arrangement.
- Validate motion limits and axis response at low speed after restoring the controller program.
- Mount the system module and associated axis modules in the cabinet arrangement specified for the 1394 system.
- Wire line input, logic power, protective earth, feedback and braking circuits according to the Series C installation manual.
- Isolate all supplies and verify DC-bus discharge before connecting, removing or servicing drive components.