Features:
- Integrated motion controller and power conversion in one system module
- Support for four axis modules and four auxiliary encoder inputs
- Standard DH-485, RS-232, and RS-422 communication interfaces
This catalog number identifies a Bulletin 1394 GMC system module with a 5 kW power rating and integrated multi-axis motion-control capability.
The controller provides 32 K of program memory with a 16-bit processor and is programmed and commissioned with the documented GML software workflow.
Before ordering Allen-Bradley 1394-SJT05-C, confirm the complete order code, documented configuration, and connection requirements for the installed system.
1394-SJT05-C Datasheet Manuals, Datasheets, Drivers, Link
Documentation Note: This document is provided for technical reference. Please confirm the applicable product configuration and document revision before ordering.
- The integrated controller supports four connected axis modules and coordinates their programmed motion from one Bulletin 1394 system module.
- Four auxiliary encoder inputs accept documented feedback signals for machine functions that require additional position or synchronization information.
- The GMC controller provides 32 K of application memory with a 16-bit processor and uses the official GML programming environment.
- This catalog configuration uses terminal blocks for input, logic, and shunt connections; verify every conductor against the official wiring diagrams.
- Standard communications include DH-485, RS-232, and RS-422 interfaces for programming and system communication within the supported GMC architecture.
- The module interfaces with compatible axis modules through the shared 1394 power structure and documented control, feedback, and status connections.
- Supply 324–528 V AC three-phase input and the documented user-supplied logic power, branch protection, contactor, and grounding provisions.
- Maintain the official mounting clearances, cabinet ventilation, and ambient-temperature limits when installing the system and connected axis modules.
- When replacing the installed hardware, confirm terminal-block wiring and do not apply connector arrangements from other catalog configurations to this module.
- This system module provides integrated power conversion and multi-axis motion control for machinery built around compatible Bulletin 1394 axis modules.
- Auxiliary encoder channels support documented synchronization or position-feedback functions when their electrical signals and software configuration match official requirements.
- Standard serial communication and GML programming support commissioning, diagnostics, and application control within the original Bulletin 1394 architecture.