Features:
- 0.75 kW Kinetix 5100 400 V-class configuration
- Motor feedback and auxiliary feedback connectivity
- Standard digital and analog command interfaces
2198-E4007-ERS is designed for 342...528 V rms three-phase input and the documented 0.75 kW operating point.
Kinetix 5100 provides standalone indexing, pulse-train, speed-command, and torque-command methods for single-axis control.
Check motor and feedback support, I/O voltage and assignment, connector kits, cable lengths, branch protection, enclosure conditions, and STO validation before startup.
Quotation-time checks determine stock, condition, price, and shipping time for 2198-E4007-ERS.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The keypad interface displays drive status and setup parameters
- Fault and alarm codes are documented for Kinetix 5100 troubleshooting
- EtherNet/IP status and addressing can be reviewed through the drive interface
- Official selection tables identify supported Kinetix TLP motor combinations
- 2198-K51CK-D15M is the listed motor-feedback connector kit
- 2198-AUXKIT supports the documented auxiliary-feedback connection
- KTK-R-15 is the listed UL/CSA mains fuse for this catalog number
- 15 A is the listed maximum DIN gG fuse value for IEC applications
- 1489-M3D100 is the listed mains circuit-breaker catalog number
- Pulse-train point-to-point positioning control
- Digital-I/O indexing for stored position sequences
- Analog-command standalone speed or torque control