Features:
- Fixed 16-point base: ten DC inputs and six relay outputs
- AC-powered controller: documented 120/240 V AC supply
- Compact legacy control: embedded logic and I/O for standalone equipment
1761-L16BWA is a self-contained MicroLogix 1000 solution for modest sensor and relay-load counts.
Because its I/O is fixed, terminal mapping, common grouping and the stored program define the real replacement scope.
A service package should join label photos with the program, software and cable access, power drawing, I/O list and functional acceptance steps.
Availability of 1761-L16BWA is subject to Apter Power inventory and sourcing confirmation.
Allen-Bradley 1761-L16BWA MicroLogix 1000 16-Point AC-Powered Controller Manuals, Datasheets, and Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- DC source: identify the 24 V DC sensor supply.
- Commons: preserve polarity and grouping at the terminal block.
- Filters: record any application-sensitive input timing.
- Labels: tie each wire number to the controller address.
- Voltage: identify the supply switched by each relay.
- Current and inrush: compare every load with official limits.
- Suppression: retain approved protection on inductive devices.
- Test: verify controller command and field response separately.
- Program: upload and validate the ladder file before shutdown.
- Access: retain programming software, cable and password information.
- Wiring: create a terminal-level I/O conversion schedule.
- Migration: prove equivalent logic and safe field behavior before cutover.
- Standalone machines: execute compact local logic with fixed I/O.
- Relay control: switch six documented field loads from the embedded base.
- Brownfield maintenance: sustain MicroLogix 1000 applications during planned migration.