Features:
- Terminal family: PanelView Standard 550 keypad HMI.
- Display: 5.5-inch monochrome operator screen.
- Communications: DeviceNet plus a separate RS-232 printer port.
The stored application supplies the machine screens, alarm text and command objects used by the operator.
DeviceNet node settings and the printer-port role are part of the installed terminal configuration.
Migration planning must include the application, panel opening, supply wiring and network conversion path.
Apter Power supports exact-catalog and migration review for the Allen-Bradley 2711-K5A10 PanelView 550 Terminal.
Allen-Bradley 2711-K5A10 PanelView 550 Terminal Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Uses a 5.5-inch monochrome display for application-defined graphics and text.
- Accepts navigation and machine commands through the physical keypad.
- Runs the alarm, status and control objects stored in the PanelBuilder32 project.
- Uses DeviceNet as the primary controller network.
- Provides a separate RS-232 port intended for printer connectivity.
- Requires node address, baud rate and network wiring to be recorded before replacement.
- Back up the approved terminal application before hardware removal.
- Verify supply wiring, panel cutout and DeviceNet connector assignment.
- Review any adapter plate, network gateway and converted project required by a newer HMI.
- Operator interface on established DeviceNet-connected machinery.
- Local display of production status, alarms and operating prompts.
- Legacy HMI service where the original application and network configuration are retained.