Features:
- Compact modular HMI: 6.5-inch VGA resistive-touch display
- Legacy connectivity: standard Ethernet and RS-232 with optional module support
- Standard OS code: the D8 suffix excludes extended Windows CE file viewers
The 700 touch configuration is physically smaller than the 1000, 1250, and 1500 terminals while sharing the modular logic architecture.
Its communication-module interface can be more important to a replacement decision than the front display size.
Rockwell Automation discontinued this catalog number, so the installed Series, module, firmware, and application record should lead sourcing decisions.
For 2711P-T7C4D8, Apter Power can review official records, rear-module scope, quotation details, and migration-related procurement needs.
Verified resources for 2711P-T7C4D8:
Important Notice: Confirm the required application files, firmware, cables, accessories, and documentation in the quotation before ordering.
- Base ports: Ethernet, RS-232, and two USB host connections belong to the standard logic module.
- Add-on networks: identify any rear communication module before removal.
- Weight scope: official base weight excludes the optional communication module.
- Transfer decision: preserve or replace the module only under its own documented compatibility rules.
- Overlay type: use the 8-wire analog resistive screen as a single-touch interface.
- Calibration: recalibrate before compensating for shifted touch targets in the application.
- Backlight: distinguish a failed field-replaceable CCFL from a dark or unpowered terminal.
- Front rating: maintain the enclosure seal and flat mounting surface.
- Ethernet route: retain the IP address, switch port, and controller shortcut.
- RS-232 route: record protocol, pinout, cable, and baud settings.
- Optional network: document DH+, DH-485, or ControlNet media when present.
- Acceptance: test every used path, not only the terminal startup screen.
- Legacy machine visualization: maintain local graphics and touch commands for installed FactoryTalk View ME applications.
- Serial-connected equipment: retain an RS-232 path where the approved architecture requires it.
- Modular network stations: support an optional communication module documented for the installed terminal assembly.